New 986 Wheel Loader in North Carolina

Engine

Bore	5.4in
Displacement	927in²
Emissions	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Engine Model	C15 Cat®
Engine Power - ISO 14396: 2002	449hp
Net Power - SAE J1349:2011	373hp
Peak Power Speed	1600
Peak Power Speed - Gross - SAE J1995	456hp
Peak Torque - 1,200 rpm - SAE J1995	1778lb/ft
Rated Speed	2000
Rated Speed - 2,000 rpm - EEC 80/1269	373hp
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)	378hp
Rated Speed - 2,000 rpm - ISO 9249	373hp
Rated Speed - 2,000 rpm - ISO 9249 (DIN)	378hp
Stroke	6.75in
Torque Rise	16%

Transmission

Direct Drive - Forward 2	8mile/h
Direct Drive - Forward 3	14mile/h
Direct Drive - Forward 4	24mile/h
Direct Drive - Reverse 2	9mile/h
Direct Drive - Reverse 3	16mile/h
Direct Drive - Reverse 4	25.4mile/h
Forward - 1	5mile/h
Forward - 2	8mile/h
Reverse - 1	5mile/h
Reverse - 2	8mile/h
Transmission Type	Cat planetary power shift

Operating Specifications

Bucket Capacity Range	5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match - High Lift	772/773
Cat Truck Match - Standard	770/735/740/745
Operating Weight - High Lift	104005lb
Operating Weight - Standard	97785lb
Rated Payload - High Lift (Quarry Face)	11ton (US)
Rated Payload - Loose Material (High Lift)	12.1ton (US)
Rated Payload - Loose Material (Standard)	14ton (US)
Rated Payload - Standard (Quarry Face)	11ton (US)

Hydraulic System - Lift/Tilt

Lift Cylinder - Bore	7.5in
Lift Cylinder - Stroke	45in
Lift/Tilt System - Circuit	Load Sense
Lift/Tilt System - Pump	2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm	123gal/min
Relief Valve Setting - Lift/Tilt	4050psi
Tilt Cylinder - Bore	6.7in
Tilt Cylinder - Stroke	28.4in

Hydraulic Cycle Times

Dump	3.5s
Lower	5.2s
Lower Float Down	4.3s
Rack Back	4.5s
Raise	9s
Total Hydraulic Cycle Time	21.3s

Hydraulic System - Steering

Maximum Flow at 1,400 rpm	52gal/min
Steering Cut Off Pressure	4000psi
Steering System - Circuit	Load Sense
Steering System - Pump	Piston, variable displacement
Total Steering Angle	70°

Air Conditioning System

Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

Axles

Front	Fixed
Oscillation Angle	±12.5°
Oscillation Angle - Chain Arrangement	±8.5°
Rear	Trunnion

Brakes

Brakes	ISO 3450:2011

Operator's Cab

ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Service Refill Capacities

Axle Oil - Differentials and Final Drives - Front	49gal (US)
Axle Oil - Differentials and Final Drives - Rear	45gal (US)
Cooling Systems	26gal (US)
Crankcase	9gal (US)
Diesel Exhaust Fluid Tank	6gal (US)
Fuel Tank	141gal (US)
Fuel Tank - Short Lift	127gal (US)
Hydraulic System - Tank Only	34gal (US)
Hydraulic System Factory Fill	87gal (US)
Transmission	20gal (US)

Sound Performance - Standard

Machine Sound Level (ISO 6395)	112dB(A)
Note	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Operator Sound Level (ISO 6396)	72dB(A)

Sound Performance - Suppression

Machine Sound Level (ISO 6395)	110dB(A)
Note	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Operator Sound Level (ISO 6396)	72dB(A)

Dimensions (Approximate) - Standard Lift Linkage

B-Pin Height - Maximum Lift	16.1ft
Clearance at Maximum Lift	10.1ft
Front Axle Centerline to Bucket Tip	13.8ft
Ground to Center of Front Axle	3.2ft
Ground to Fuel Tank Clearance	2.3ft
Ground to Lower Hitch Clearance	1.5ft
Ground to Top of Exhaust Stacks	13.3ft
Ground to Top of Hood	10.7ft
Ground to Top of ROPS	13.5ft
Maximum Overall Height - Bucket Raised	22.4ft
Maximum Overall Length	36.6ft
Note	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Reach - Maximum Lift	7.1ft
Rear Axle - Centerline to Bumper	10.3ft
Wheel Base	12.5ft

Dimensions (Approximate) - High Lift Linkage

B-Pin Height - Maximum Lift	17.6ft
Clearance at Maximum Lift	11.6ft
Front Axle Centerline to Bucket Tip	15.3ft
Ground to Center of Front Axle	3.2ft
Ground to Fuel Tank Clearance	2.3ft
Ground to Lower Hitch Clearance	1.5ft
Ground to Top of Exhaust Stacks	13.3ft
Ground to Top of Hood	10.7ft
Ground to Top of ROPS	13.5ft
Maximum Overall Height - Bucket Raised	23.9ft
Maximum Overall Length	38ft
Note	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Reach - Maximum Lift	7.4ft
Rear Axle - Centerline to Bumper	10.3ft
Wheel Base	12.5ft

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

B-Pin Height at Maximum Lift	15ft
Clearance at Maximum Lift	10.7ft
Front Axle Centerline to Bucket Tip	12.2ft
Ground to Center of Rear Axle	3.2ft
Ground to Fuel Tank Clearance	2.3ft
Ground to Lower Hitch Clearance	1.5ft
Ground to Top of Exhaust Stacks	13.3ft
Ground to Top of Hood	10.7ft
Ground to Top of ROPS	13.5ft
Maximum Overall Height, Bucket Raised	20.9ft
Maximum Overall Length	35ft
Reach at Maximum Lift	8ft
Rear Axle Center Line to Bumper	10.3ft
Wheel Base	12.5ft

Dimensions (Approximate) - Quick Coupler and Fork

B-Pin Height at Maximum Lift	15ft
Front Axle Centerline to Bucket Tip	12.6ft
Ground to Center of Rear Axle	3.2ft
Ground to Fuel Tank Clearance	2.3ft
Ground to Lower Hitch Clearance	1.5ft
Ground to Top of Exhaust Stacks	13.3ft
Ground to Top of Hood	10.7ft
Ground to Top of ROPS	13.5ft
Maximum Overall Length	35.4ft
Rear Axle Center Line to Bumper	10.3ft
Wheel Base	12.5ft