| Displacement | 12.5L |
|---|---|
| Engine Model | Cat C13 |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | 432hp |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1620lb/ft |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | 436hp |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1636lb/ft |
| Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 | 404hp |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | 1515lb/ft |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
|---|---|
| Operating Weight | 78264lb |
| Bucket Range | 4.8-17.2 m³ 6.25-22.5 yd³ |
|---|
| Forward - 1 | 3.9mile/h |
|---|---|
| Forward - 2 | 7.3mile/h |
| Forward - 3 | 13mile/h |
| Forward - 4 | 24.5mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Reverse - 1 | 4.4mile/h |
| Reverse - 2 | 8.4mile/h |
| Reverse - 3 | 17.4mile/h |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives.” |
|---|---|
| Note (2) | European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | 107 |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 70dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 110dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 75 |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 70dB(A) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
|---|
| Breakout Force | 59060lbf |
|---|---|
| Note (1) | For a machine configuration as defined under Weight. |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 22418kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 46526lb |
| Cooling System | 13.7gal (US) |
|---|---|
| Crankcase | 9.8gal (US) |
| DEF Tank | 5.5gal (US) |
| Differential - Final Drives - Front | 24.3gal (US) |
| Differential - Final Drives - Rear | 24.3gal (US) |
| Fuel Tank | 112.5gal (US) |
| Hydraulic Tank | 40.4gal (US) |
| Transmission | 20.3gal (US) |
| Hydraulic Cycle Time - Total | 10.1 seconds |
|---|---|
| Implement System - Maximum Operating Pressure | 4975psi |
| Implement System - Maximum Pump Output at 2,250 rpm | 119gal/min |
| Note | All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
|---|
| Centerline of Rear Axle to Edge of Counterweight | 9.4ft |
|---|---|
| Centerline of Rear Axle to Hitch | 6.3ft |
| Ground Clearance | 1.4ft |
| Height - Top of Exhaust Pipe | 12.4ft |
| Height - Top of Hood | 10ft |
| Height - Top of ROPS | 12.6ft |
| Hinge Pin Height at Carry | 2.11ft |
| Hinge Pin Height at Maximum Lift | 16.1ft |
| Lift Arm Clearance at Maximum Lift | 13.4ft |
| Overall Length - Without Bucket | 29.11ft |
| Tread Width | 8.4ft |
| Wheel Base | 12.6ft |
| Width over Tires (Loaded) | 11.5ft |
| Centerline of Rear Axle to Edge of Counterweight | 8.95ft |
|---|---|
| Centerline of Rear Axle to Hitch | 6.3ft |
| Ground Clearance | 428mm |
| Height - Top of Exhaust Pipe | 3736mm |
| Height - Top of Hood | 3036mm |
| Height - Top of ROPS | 3801mm |
| Hinge Pin Height at Carry | 2.7ft |
| Hinge Pin Height at Maximum Lift | 4741mm |
| Lift Arm Clearance at Maximum Lift | 3902mm |
| Overall Length - Without Bucket | 8597mm |
| Tread Width | 8.4ft |
| Wheel Base | 3800mm |
| Width over Tires (Loaded) | 11.5ft |
