| Biodiesel Capability | Up to B20¹ |
|---|---|
| Displacement | 567.5in³ |
| Displacement | 9.3 L |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
| Engine Model | Cat® C9.3B |
| Engine Power - 1,600 rpm ISO 14396:2002 | 321hp |
| Engine Power - 1,600 rpm ISO 14396:2002 | 325 hp (metric) |
| Engine Torque - 1,200 rpm ISO 14396:2002 | 1313lbf·ft |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1313lb/ft |
| Gross Power - 1,600 rpm SAE J1995:2014 | 325hp |
| Gross Power - 1,600 rpm SAE J1995:2014 | 329 hp (metric) |
| Gross Torque - 1,200 rpm SAE J1995:2014 | 1327lbf·ft |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1327lb/ft |
| Net Power - 1,600 rpm ISO 9249:2007, SAE J1349:2011 | 303hp |
| Net Power - 1,600 rpm ISO 9249:2007, SAE J1349:2011 | 307 hp (metric) |
| Net Torque - 1,200 rpm ISO 9249:2007, SAE J1349:2011 | 1255lbf·ft |
| Note (2) | ¹Cat engines are compatible with diesel fuel blended with following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidel |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Note | Weight based on a machine configuration with Z-bar linkage, Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear axles, powert |
|---|---|
| Operating Weight | 51124lb |
| Forward - 1 | 4.2mile/h |
|---|---|
| Forward - 2 | 8.4mile/h |
| Forward - 3 | 15mile/h |
| Forward - 4 | 24.5mile/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
| Reverse - 1 | 4.5mile/h |
| Reverse - 2 | 9.2mile/h |
| Reverse - 3 | 16.5mile/h |
| Reverse - 4 | 24.5mile/h |
| Exterior Sound Power Level - ISO 6395:2008 | 109dB(A) |
|---|---|
| Exterior Sound Power Level - ISO 6395:2008² | 108dB(A) |
| Note (1) | ¹Including countries that adopt the EU and UK Directives. |
| Note (2) | ²Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Operator Sound Pressure Level - ISO 6396:2008 | 70dB(A) |
| Operator Sound Pressure Level - ISO 6396:2008 ¹ | 69dB(A) |
| With Cooling Fan Speed at Maximum Value - Note | Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
|---|
| Breakout Force | 38999lbf |
|---|---|
| Note | For a machine configuration as defined under “Weight.” |
| Note (1) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 37° Turn | 32727lb |
| Static Tipping Load - Full 37° Turn - No Tire Deflection | 35224lb |
| Cooling System | 17.4gal (US) |
|---|---|
| Crankcase | 6.1gal (US) |
| DEF Tank | 6.9gal (US) |
| Differential - Final Drives - Front | 15.1gal (US) |
| Fuel Tank | 80.1gal (US) |
| Hydraulic Tank | 30.1gal (US) |
| Transmission | 15.5gal (US) |
| Hydraulic Cycle Time - Total | 10.1s |
|---|---|
| Hydraulic Cycle Time - Total | 10.1 seconds |
| Implement System - Maximum Operating Pressure | 4496psi |
| Implement System - Maximum Pump Output at 2,275 rpm | 99gal/min |
| Ground Clearance | 1.33ft |
|---|---|
| Height - Top of Hood | 9.42ft |
| Height - Top of ROPS | 11.83ft |
| Hinge Pin Height at Carry Height | 2ft |
| Hinge Pin Height at Maximum Lift | 13.92ft |
| Lift Arm Clearance at Maximum Lift | 12.08ft |
| Note | All dimensions are approximate and based on machine equipped with 4.2 m³ (5.5 yd³) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. |
| Overall Length - Without Bucket | 24.33ft |
| Rack Back - Carry Height | 50° |
| Rack Back - Carry Height | 50 degrees |
| Rack Back - Maximum Lift | 62° |
| Rack Back - Maximum Lift | 62 degrees |
| Rack Back at Ground | 39 degrees |
| Tread Width | 7.25ft |
| Wheel Base | 11.67ft |
| Width over Tires (Loaded) | 9.92ft |
| Ground Clearance | 1.33ft |
|---|---|
| Height - Top of Hood | 9.42ft |
| Height - Top of ROPS | 11.83ft |
| Hinge Pin Height at Carry Height | 2.5ft |
| Hinge Pin Height at Maximum Lift | 15.75ft |
| Lift Arm Clearance at Maximum Lift | 13.67ft |
| Note | All dimensions are approximate and based on machine equipped with 4.2 m³ (5.5 yd³) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. |
| Overall Length - Without Bucket | 26.5ft |
| Rack Back - Carry Height | 49° |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 71° |
| Rack Back - Maximum Lift | 71 degrees |
| Rack Back at Ground | 37 degrees |
| Tread Width | 7.25ft |
| Wheel Base | 11.67ft |
| Width over Tires (Loaded) | 9.92ft |
