| Bore | 3.4in |
|---|---|
| Displacement | 147in² |
| Engine Model | Cat C2.4* |
| Gross Power | 42hp |
| Maximum Gross Power | 42hp |
| Net Power - 2,200 rpm - ISO 9249 R-ing | 40hp |
| Net Power - 2,200 rpm - SAE J1349 R-ing | 40hp |
| Note | *Engine meets U.S. EPA Tier 4 Final emission standards. |
| Stroke | 4in |
| Operating Weight | 9414lb |
|---|
| Bucket Capacities | 0.6-1.0 m3 (0.8-1.3 yd3) |
|---|---|
| Bucket Capacities - General Purpose | 0.6 m3 (0.8 yd3) |
| Bucket Capacities - Light Material | 1.0 m3 (1.3 yd3) |
| Travel Speed | 12.4mile/h |
|---|
| 3rd Auxiliary Flow | 14gal/min |
|---|---|
| Hydraulic Cycle Time - Lower, Float | 2.4s |
| Main Relief | 3481psi |
| Hydraulic Cycle Time - Dump | 0.7s |
|---|---|
| Hydraulic Cycle Time - Lift | 4.4s |
| FOPS | ISO 3449:2005 Level I |
|---|---|
| ROPS | ISO 3471:2008 |
| Cooling System | 3gal (US) |
|---|---|
| Engine Oil | 2.4gal (US) |
| Fuel Tank | 11.4gal (US) |
| Hydraulic System | 6.3gal (US) |
| Articulation Angle | 40° |
|---|---|
| Cab Height | 8.25ft |
| Departure Angle - Degrees | 30° |
| Dig Depth | 6in |
| Dump Angle at Maximum Height | 40° |
| Fork Depth Above Ground | 2in |
| Fork Height at Maximum Reach | 4.67ft |
| Fork Reach at Maximum Height | 2ft |
| Ground Clearance | 10in |
| Hinge Pin at Maximum Height | 10.08ft |
| Load Over Height | 9.17ft |
| Machine Width** | 5.58ft |
| Maximum Dump Height* | 7.5ft |
| Maximum Fork Height | 9.83ft |
| Maximum Reach | 4.5ft |
| Note (1) | *Vary with bucket size. |
| Note (2) | **Vary with tire size. |
| Note (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
| Overall Length - With Bucket* | 15.75ft |
| Overall Length - With Forks | 17.08ft |
| Reach - Ground Level | 2.67ft |
| Reach at Maximum Dump Height* | 2.33ft |
| Steering Angle | 80° |
| Tire Gauge | 4.33ft |
| Turning Radius - Inside Tire** | 5.92ft |
| Turning Radius - Over Bucket* | 13.17ft |
| Wheel Base | 6.42ft |
| Width - Over Bucket* | 5.83ft |
| Articulation Angle | 40° |
|---|---|
| Cab Height | 8.25ft |
| Departure Angle - Degrees | 30° |
| Dig Depth | 8in |
| Dump Angle at Maximum Height | 40° |
| Fork Depth Above Ground | 2in |
| Fork Height at Maximum Reach | 4.67ft |
| Fork Reach at Maximum Height | 2ft |
| Ground Clearance | 10in |
| Hinge Pin at Maximum Height | 10.58ft |
| Load Over Height | 9.67ft |
| Machine Width** | 5.58ft |
| Maximum Dump Height* | 8ft |
| Maximum Fork Height | 10.33ft |
| Maximum Reach | 4.92ft |
| Note (1) | *Vary with bucket size. |
| Note (2) | **Vary with tire size. |
| Note (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
| Overall Length - With Bucket* | 16.17ft |
| Overall Length - With Forks | 17.58ft |
| Reach - Ground Level | 3.25ft |
| Reach at Maximum Dump Height* | 2.42ft |
| Steering Angle | 80° |
| Tire Gauge | 4.33ft |
| Turning Radius - Inside Tire** | 5.92ft |
| Turning Radius - Over Bucket* | 13.42ft |
| Wheel Base | 6.42ft |
| Width - Over Bucket* | 5.83ft |
| Breakout Force | 6160lbf |
|---|---|
| Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** | 5401lb |
| Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** | 5512lb |
| Note (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
| Note (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
| Note (3) | ***Manual quick coupler, precleaner hood. |
| Note (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
| Operating Weight | 9414lb |
| Rack Back - Transport Position | 51° |
| Rated Bucket Capacity | 0.8yd³ |
| Rated Operating Load at Full Turn - Bucket*** | 2701lb |
| Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** | 3366lb |
| Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** | 2524lb |
| Straight Tipping Load - Bucket*** | 6415lb |
| Tire Size | 33 × 15.5-16.5, 12 PR |
| Breakout Force | 6204lbf |
|---|---|
| Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** | 5004lb |
| Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** | 5115lb |
| Note (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
| Note (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
| Note (3) | ***Manual quick coupler, precleaner hood. |
| Note (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
| Operating Weight | 9462lb |
| Rack Back - Transport Position | 51° |
| Rated Bucket Capacity | 0.8yd³ |
| Rated Operating Load at Full Turn - Bucket*** | 2502lb |
| Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** | 3148lb |
| Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** | 2361lb |
| Straight Tipping Load - Bucket*** | 5975lb |
| Tire Size | 33 × 15.5-16.5, 12 PR |
| Bucket Type | General Purpose |
|---|---|
| Bucket Width | 70in |
| Dump Height | 90in |
| Maximum Material Density | 3169lb/yd³ |
| Note | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
| Rated Capacity | 0.8yd³ |
| Bucket Type | Light Material |
|---|---|
| Bucket Width | 74in |
| Dump Height | 85in |
| Maximum Material Density | 1989lb/yd³ |
| Note | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
| Rated Capacity | 1.3yd³ |
| Recyclability | 97% |
|---|
