| Bore | 5.7in |
|---|---|
| Displacement | 1105in³ |
| Engine Model | Cat® C18 |
| Gross Power - SAE J1995:2014 | 562hp |
| Net Power - SAE J1349:2011 | 496hp |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
| Note (2) | The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3. |
| Peak Power Speed | 1500r/min |
| Peak Torque - 1,300 rpm | 2092lb/ft |
| Rated Speed | 1900r/min |
| Stroke | 7.2in |
| Torque Rise | 52% |
| Blade Capacities | 7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
|---|---|
| Operating Weight | 105271lb |
| Direct Drive - Forward 1 | Lock-up disabled |
|---|---|
| Direct Drive - Forward 2 | 7.7mile/h |
| Direct Drive - Forward 3 | 13.7mile/h |
| Direct Drive - Forward 4 | 23.9mile/h |
| Direct Drive - Reverse 1 | 4.5mile/h |
| Direct Drive - Reverse 2 | 8.1mile/h |
| Direct Drive - Reverse 3 | 14.3mile/h |
| Forward - 1 | 4.2mile/h |
| Forward - 2 | 7.2mile/h |
| Forward - 3 | 12.6mile/h |
| Forward - 4 | 22mile/h |
| Note | Travel speeds based on 35/65-R33 tire |
| Reverse - 1 | 4.2mile/h |
| Reverse - 2 | 7.6mile/h |
| Reverse - 3 | 13.3mile/h |
| Transmission Type | Cat planetary power shift |
| Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke | 140 mm × 230 mm (5.5 in × 9.1 in) |
|---|---|
| Cylinders, Double Acting - Lift, Bore and Stroke | 139.75 mm × 1021 mm (5.5 in × 40.2 in) |
| Lift/Tilt System | Variable displacement piston |
| Lift/Tilt System - Circuit | Pilot operated LS valve with EH |
| Maximum Flow at 1,900 rpm | 153gal/min |
| Pilot Maximum Flow | 13.7gal/min |
| Pilot Relief Valve Setting | 580psi |
| Pilot System | Variable displacement piston |
| Relief Valve Setting - Lift/Tilt | 4641psi |
| Maximum Flow | 65.8gal/min |
|---|---|
| Relief Valve Setting - Steering | 3495psi |
| Steering Cycle Times - High Idle | 3.1s |
| Steering Cycle Times - Low Idle | 5.7s |
| Steering System - Circuit | Pilot, load sensing |
| Steering System - Pump | Piston, variable displacement |
| Total Steering Angle | 86° |
| Cooling System | 31.7gal (US) |
|---|---|
| Crankcase | 15.9gal (US) |
| Diesel Exhaust Fluid Tank | 8.7gal (US) |
| Differential - Final Drives - Front | 49.1gal (US) |
| Differential - Final Drives - Rear | 49.1gal (US) |
| Fuel Tank | 209.5gal (US) |
| Hydraulic System - Tank Only | 37gal (US) |
| Hydraulic System Factory Fill | 63.4gal (US) |
| Note (1) | All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este |
| Transmission | 31.7gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co |
|---|
| Front | Fixed |
|---|---|
| Oscillation Angle | ±13° |
| Rear | Trunnion |
| Brakes | ISO 3450: 2011 |
|---|
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)** | 109dB(A) |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)** | 110dB(A) |
| Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” |
| Note (2) | ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 |
| Note (3) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (5) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 72dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Centerline of Front Axle to Hitch | 7.5ft |
|---|---|
| Centerline of Rear Axle to Edge of Bumper | 10.5ft |
| Ground Clearance | 1.7ft |
| Ground Clearance - Bumper | 3.1ft |
| Height - Top of Air Cleaner | 12.8ft |
| Height - Top of Cab | 13.7ft |
| Height - Top of Exhaust Stack | 15.9ft |
| Height - Top of Hood | 10.9ft |
| Length - Front of Tire | 28.4ft |
| Length - Straight Blade on Ground | 32.6ft |
| Length - Universal Blade on Ground | 34.4ft |
| Wheel Base | 14.9ft |
