| Engine Model | Cat® C13 |
|---|---|
| Engine Power - Stage V Engine - ISO 14396:2002 | 345hp |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 361hp |
| Engine Power - VR Engine - ISO 14396:2002 | 361hp |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. |
| Note (2) | Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. |
| Note (3) | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
| Note (4) | No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. |
| Note (5) | Optional Ventilation Reduction package available. |
| Note (6) | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. |
| Note (7) | Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. |
| Breakout Force - Lift and Tilt | 53330lb |
|---|---|
| Gross Machine Mass - Loaded | 138316lb |
| Nominal Payload Capacity | 33069lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 69635lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 83218lb |
| Note | *Calculated weights. |
|---|---|
| Operating Mass + Rated Payload* | 128258lb |
| Operating Mass + Rated Payload* - Front Axle | 91412lb |
| Operating Mass + Rated Payload* - Rear Axle | 36846lb |
| Operating Mass* | 95189lb |
| Operating Mass* - Front Axle | 38358lb |
| Operating Mass* - Rear Axle | 56831lb |
| Forward - 1 | 3mile/h |
|---|---|
| Forward - 2 | 5.7mile/h |
| Forward - 3 | 10.2mile/h |
| Forward - 4 | 17.9mile/h |
| Reverse - 1 | 3.7mile/h |
| Reverse - 2 | 6.5mile/h |
| Reverse - 3 | 11.6mile/h |
| Reverse - 4 | 20.2mile/h |
| Dump | 3.3s |
|---|---|
| Lower, Empty, Float Down | 2.9s |
| Raise | 6.8s |
| Total Cycle Time | 13.2s |
| Bolt Together Bucket (1) | 8.9yd³ |
|---|---|
| Bolt Together Bucket (2) | 9.8yd³ |
| Bucket Capacities | 5.7-8.6 m³ (7.5-11.2 yd³) |
| Dump Bucket - 1 - Standard Bucket | 7.5yd³ |
| Dump Bucket - 2 | 8yd³ |
| Dump Bucket - 3 | 8.6yd³ |
| Dump Bucket - 4 | 9.4yd³ |
| Dump Bucket - 5 | 9.8yd³ |
| Dump Bucket - 6 | 10.5yd³ |
| Ejector Bucket | 7.6yd³ |
| Light Material Bucket | 11.2yd³ |
| Articulation Angle | 44° |
|---|---|
| Axle Oscillation | 8° |
| Inner Clearance Radius | 123.5in |
| Outside Clearance Radius | 272in |
| Tire Size | 26.5R25 |
|---|
| Cooling System | 19.8gal (US) |
|---|---|
| Engine Crankcase | 9.8gal (US) |
| Hydraulic Tank | 35.7gal (US) |
| DEF Tank | 7.1gal (US) |
|---|---|
| Front Differential and Final Drive | 39gal (US) |
| Fuel System | 128.4gal (US) |
| Rear Differential and Final Drive | 37.2gal (US) |
| Transmission | 14.2gal (US) |
