R1700G Underground Mining Loader

Bore	5.1in
Displacement	680in³
Engine Model	Cat® C11
Engine Power - Tier 3 Engine - ISO 14396:2002	345HP
Engine Power - VR Engine - ISO 14396:2002	345HP
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)	All rating conditions are based on ISO/TR 14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications
Note (3)	Engine derate will commence at an altitude of 3050 m (10,006 ft).
Note (4)	Optional Ventilation Reduction package available.
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Stroke	5.5in

Breakout Force - SAE	46051lb
Gross Machine Mass - Tramming	120151lb
Gross Machine Mass - Truck Loading	116845lb
Nominal Payload Capacity	27558lb
Nominal Payload Capacity - Tramming	30865lb
Nominal Payload Capacity - Truck Loading	27558lb
Static Tipping Load - Full Turn - Lift Arms Horizontal	57995lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal	70065lb

Empty	84878lb
Empty - Front Axle	37346lb
Empty - Rear Axle	47532lb
Loaded	112436lb
Loaded - Front Axle	81741lb
Loaded - Rear Axle	30695lb
Loaded - Tramming	115743lb

Dump	2.9s
Lower, Empty, Float Down	2.4s
Raise	6.8s
Total Cycle Time	12.1s

Bucket Capacity	4.6-8.8 m³ (6.0-11.5 yd³)
Dump Bucket - 1	6yd³
Dump Bucket - 2	6.5yd³
Dump Bucket - 3 - Standard Bucket	7.5yd³
Dump Bucket - 4	8.6yd³
Dump Bucket - 5	9.5yd³
Dump Bucket - 6	11.5yd³
Ejector Bucket	7.5yd³

Articulation Angle	44°
Axle Oscillation	8°
Inner Clearance Radius**	127.1in
Note	**Clearance Dimensions are for reference only.
Outside Clearance Radius**	270.8in

Cooling System	16.6gal (US)
Engine Crankcase - With Filter	8.98gal (US)
Front Differential and Final Drives	23.8gal (US)
Fuel Tank	150.3gal (US)
Hydraulic Tank	33gal (US)
Rear Differential and Final Drives	23.8gal (US)
Secondary Fuel Tank - If Equipped	117.8gal (US)
Transmission	12.4gal (US)

Forward - 1	2.9mile/h
Forward - 2	5.2mile/h
Forward - 3	8.9mile/h
Forward - 4	15mile/h
Reverse - 1	3.4mile/h
Reverse - 2	5.8mile/h
Reverse - 3	10.2mile/h
Reverse - 4	15.7mile/h

Tire Size	26.5 × 25

Standards	ROPS/FOPS Certified Cab

Standard Equipment:

12V Power Supply in Cab
Alternator, 95-amp
Auxiliary Start Receptacle
Battery Disconnect Switch, Ground Level
Circuit Breaker, 80-amp
Corrosive Protection Spray
Diagnostic Connector
Electric Starting, 24-volt
Engine Shutdown Switches
– Rear Right Hand Side
External Lighting System, Front, Rear, Halogen Work Lights
Low Maintenance Batteries
Reversing Alarm
Starting and Charging System

Cat Electronic Monitoring System (Cat EMS)
Electric Horns
Gauges
– Engine Coolant Temperature
– Transmission Coolant Temperature
– Hydraulic Oil Temperature
– Fuel Level
– Speedometer
– Tachometer
Indicator Lights
– Alert Warning Light
– Residual Brake Pressure
Low Hydraulic Level Warning
Open Operator Station ROPS/FOPS Structure
Operator Presence System (Auto Park Brake)
Pilot Hydraulic Implement Controls, Single Joystick
Push Button Panel for Lights
Suspension Seat with Retractable Seat Belt
STIC Steering

Cat C11 Diesel Engine, ATAAC, 6 Cylinder
Brake Axle Cooling
Electric Fuel Priming Pump
Engine Air Intake Precleaner
Engine Oil Filter, Remote Mounted
Fuel System Manual Shut Off Tap
Heat Shields
Long Life Coolant
Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse
Radiator, Cross Flow
Radiator Cap Manual Release
Rims, 5-Piece, Tubeless
SAFR^™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes
Torque Converter
Transmission Neutralizer
Transmission Filter Drain Tap

Brake Light
Bucket Control Group, Standard
Bucket, Dump
Bucket Lip
Bucket Positioner, Return To Dig
Catalytic Exhaust Purifier/Muffler Group
Decals, International Picto Graphics
Engine and Transmission Belly Guards
Fenders, Front, Rear
Firewall
Fuel Lines Double Braided (Stainless Sleeving)
Hand Hold (Access On/Off Top Deck)
Hydraulic Oil Cooler – Swing Out Rear Frame
Operation and Maintenance Manual – English and other applicable local languages to select
Protection Wear Bars 100 × 50 mm (4 × 2 in)
Rims, 5-Piece, Tubeless
Semi Centralized Lubrication Points
S·O·S Port
– Coolant
– Engine Oil
– Hydraulic Oil
– Transmission Oil
Swing Out Radiator Grill
Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional Equipment:

Battery and Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation Switch
Brake Pressure Gauges
Brake Release Arrangements, (Requires Lines Steering Release)
– Recovery Hook
– Recovery Bar
Buckets
– Bucket, Light Weight Material (8.8 m³/11.5 yd³) (Requires Control Group, Heavy Duty)
– Ejector Bucket Installed
– Various Sizes, Dump (4.2 m³/5.5 yd³ to 7.3 m³/9.5 yd³), Ejector (5.7 m³/7.5 yd³)
Bucket, Control Group, Heavy Duty (Required for Light Weight Buckets)
Bucket Hardware
– Cutting Edge, Bolt-On Half-Arrow (BOHA)
– Cutting Edge, Cat Weld-on
– Cutting Edge, Half Arrow, Flat
– Heel Shrouds, Ejector and Dump Buckets
– Mechanically Attached Shrouds (MAS)
– Mechanically Attached Wear Plate System, Cutting Edge Protection (MAWPS)
– Mechanically Attached Wear Plate System, Bottom Protection (MAWPS)
– Protector Pads (Bottom of Bucket)
– Wear Bars, Ejector and Dump Buckets
– Wear Liner (5.7 m³/7.5 yd³ Dump Bucket)
Bucket Lip
– Lip Fully Welded or Tack Welded
– Lip Bare (No Hardware)
– Bolt-On Ready
– MAS Ready (Mechanically Attached Shrouds)
Camera, Color Rear Facing
Cover, Anti Vandalism for Shipping
Draw Bar Attachment, Bolt-on
Engine Options
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)
- DPF (Flow Through) Filter
Fast Fill System
– Coolant
– Engine Oil
– Fuel (Single or Dual Tanks)
– Hydraulic Oil
– Transmission Oil
Fire Suppression System
– Ansul, Dry Powder
– Foam, Water Based
Front Light Protectors
Fuel System
– Dual Fuel Tanks
Guards
– Guard, Rear Side Quarter Window
– Guard Duo Cone Seal
Handrails
– Fold Down
Hydraulic System
– Ejector Bucket Ready
– Alternate Implement/Pilot Control Configuration
Lubrication System
– Automatic
– Centralized
Lighting
– External Lighting System, Front, Rear, LED Work Lights
Mine Transfer
– Mine Transfer Ready Rear Frame (Tack Welded)
– Lifting Group, Mine Transfer
Operators Station ROPS/FOPS Enclosed
– Air Conditioning
– Cab Pressurizer and Filter
– Duct, Window Demister
– Dome Light
– Heater
– Radio Ready Compartment for Radio and Speakers
– Strut, Cab Door
Operators Station FOPS Open
– Removable Canopy
Park Brake Switch Engagement
– Push to Apply
– Pull to Apply
Payload Control System
– Loadrite L2180
Remote Control Interface (excludes Transmitter and Receiver)
– Cattron
– RCT
Reversible Steering
Reflective Tape
Ride Control System
Rim
– Rim Identification Numbering
– Spare (Tube or Tubeless)
– Tube Type
Seats
– Seat Covers, Tee, Air and Standard
– Suspension Seat Tee, Vinyl
– Suspension Seat Tee, Air
– Suspension Seat Air Vinyl
Secondary Steering System
Service Tools
– Recovery Bar (for use with Brake Release, Recovery Bar System)
– Reference Parts Manual for Additional Tooling Available
Switches
– Additional Engine Shutdown, Mounted LHS
– Engine Shutdown, Fire Suppression Activation
– Idle Timer
– Engine Shutdown/Idle Timer
– Transmission Neutralizer Override Switch
Technology
– Command for Underground
– Vital Information Management System (VIMS) Gen 3
Tire Arrangements
– Tire, 26.5 × R25, VSMS2 L5 Bridgestone
– Tire, 26.5 × 25, VSDL, Bridgestone
– Tire, 26.5 × 25, 32 Ply, Goodyear
Wear Protection Bars
– Cab/ROPS
– Hydraulic Tank
– Radiator
– Wear Plate, Rear Underneath
NOTE: Not all features are available in all regions. See your Cat dealer for more information.

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

3.9

Based on 46 reviews

review us on

Renee Herndon

21:55 29 Feb 24

Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.

13:04 22 Feb 24

22:00 18 Feb 24

01:17 16 Feb 24

15:26 23 Sep 23

OLEKSANDR “Alex” Kovalenko

14:27 18 Sep 23

👍

Hunter Elliott

16:17 07 Sep 23

Rick Kelly-Crapse

21:06 25 Aug 23

They had all my parts for my 3208 Cat.Friendly folks at parts counter.

New R1700G Underground Mining Loader in North Carolina

Standard Equipment:

Optional Equipment:

What Our Customers Are Saying About Us

Contact Us Today

Request a New Equipment Quote

Request a New Equipment Quote

Standard Equipment:

Optional Equipment:

Related Models

R1300G Underground Mining Loader

R1700G Underground Mining Loader

R2900G Underground Mining Loader

R3000H Underground Mining Loader

AD30 Underground Mining Truck

AD45 Underground Articulated Truck

What Our Customers Are Saying About Us

Contact Us Today