| Displacement (Performance Power Mode: Speed Range 1-4) | 427in³ |
|---|---|
| Displacement (Standard Power Mode: Speed Range 1-3*) | 427in³ |
| Engine Model | Cat C7.1 ACERT** |
| Maximum Gross Power | 188hp |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 176mhp |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | 173hp |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 190mhp |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | 188hp |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 664ft·lbf |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 642ft·lbf |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | 650ft·lbf |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | 628ft·lbf |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 649ft·lbf |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 627ft·lbf |
| Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800r/min |
| Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600r/min |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Note (2) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| Note (3) | **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards. |
| Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 172mhp |
| Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 170hp |
| Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 170hp |
| Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 186mhp |
| Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 184hp |
| Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 183hp |
| Operating Weight | 35778lb |
|---|
| Bucket Capacities | 2.5-5.0 m3 (3.2-6.5 yd3) |
|---|---|
| Bucket Capacities - General Purpose | 2.5-3.2 m³ (3.2-4.2 yd³) |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) |
| FOPS | ISO 3449:2008 Level II |
|---|---|
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
| Note (3) | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| ROPS | ISO 3471:2008 |
| Cooling System | 7.9gal (US) |
|---|---|
| Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
| Engine Crankcase | 5.3gal (US) |
| Front Axles | 9.2gal (US) |
| Fuel Tank | 51.5gal (US) |
| Hydraulic System - Including Tank | 44.9gal (US) |
| Hydraulic Tank | 23.8gal (US) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Rear Axles | 9.2gal (US) |
| Transmission - Gear Box | 2.9gal (US) |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | 1.5s |
|---|---|
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.7s |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5s |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | 9.7s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | 1.7s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | 2.7s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | 6.2s |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | 10.6s |
| Maximum Flow - Implement Pump | 50gal/min |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50gal/min |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42gal/min |
| Maximum Working Pressure - Implement Pump | 4061psi |
| Note (1) | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. |
| Relief Pressure - Tilt Cylinder | 4351psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 4061psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4351psi |
| Maximum Flow - Steering Pump | 34gal/min |
|---|---|
| Maximum Steering Torque - 0° (Straight Machine) | 42506ft·lbf |
| Maximum Steering Torque - 40° (Full Turn) | 31398ft·lbf |
| Maximum Working Pressure - Steering Pump | 3500psi |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.3turns |
| Steering Articulation Angle - Each Direction | 40° |
| Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | 2.3s |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
|---|---|
| Forward and Reverse - Range 2 | 8mile/h |
| Forward and Reverse - Range 3 | 17mile/h |
| Forward and Reverse - Range 4 | 25mile/h |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101dB(A) |
|---|---|
| Note (1) | European Union Directive “2000/14/EC” |
| Operator Sound Pressure (ISO 6396:2008) | 72dB(A) |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
|---|---|
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Other Choices Include | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 23.5 R25, radial (L-3); 650/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires |
| Standard Size | 20.5 R25, radial (L-3) |
| Front | Fixed; Locking differential (standard) |
|---|---|
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
|---|
| Recyclability | 94% |
|---|
