| Bore | 3.9in |
|---|---|
| Displacement | 232in³ |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power - SAE J1995 | 110hp |
| Net Flywheel Power | 106hp |
| Net Power - ISO 9249 | 107hp |
| Net Power - SAE 1349 | 106hp |
| Peak Torque - 1,500 rpm - SAE J1995 | 276ft·lbf |
| Stroke | 4.7in |
| Breakout Force - Lift Cylinder | 6085lb |
|---|---|
| Breakout Force - Tilt Cylinder | 7362lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
| Rated Operating Capacity | 3700lb |
| Rated Operating Capacity with Optional Counterweight | 3950lb |
| Tipping Load | 7400lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
|---|---|
| Operating Weight | 9573lb |
| Bucket Pin Height - Carry Position | 9.3in |
|---|---|
| Bucket Pin Height - Maximum Lift | 128.6in |
| Bucket Pin Reach - Maximum Lift | 13.5in |
| Bumper Overhang - Behind Rear Axle | 46.2in |
| Clearance at Maximum Lift and Dump | 97.4in |
| Departure Angle | 28° |
| Ground Clearance | 10.4in |
| Height - Top of Cab | 84in |
| Length - With Bucket on Ground | 155in |
| Length - Without Bucket | 127in |
| Maximum Dump Angle | 51° |
| Maximum Overall Height | 161.5in |
| Maximum Reach - With Arms Parallel to Ground | 49.1in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA |
| Rack Back Angle - Maximum Height | 84° |
| Reach - Maximum Lift/Dump | 29in |
| Roll Back Angle | 28° |
| Turning Radius from Center - Bucket (racked) | 90.6in |
| Turning Radius from Center - Coupler | 57.7in |
| Turning Radius from Center - Machine Rear | 74.7in |
| Vehicle Width over Tires | 76in |
| Wheel Base | 54.6in |
| FOPS | ISO 3449:2005 Level I |
|---|---|
| ROPS | ISO 3471:2008 |
| Chain Box - Each Side | 2.7gal (US) |
|---|---|
| Cooling System | 4.1gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5gal (US) |
| Engine Crankcase | 3.5gal (US) |
| Fuel Tank | 31.7gal (US) |
| Hydraulic System | 14.5gal (US) |
| Hydraulic Tank | 10.3gal (US) |
| Hydraulic Flow - XE - Hydraulic Power (calculated) | 94hp |
|---|---|
| Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40gal/min |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4061psi |
| Note | *When equipped with Cat 400 Series work tools. |
| Standard Flow Mode - Hydraulic Power - Calculated | 44hp |
| Standard Flow Mode - Loader Hydraulic Flow | 23gal/min |
| Standard Flow Mode - Loader Hydraulic Pressure | 3335psi |
| Travel Speed - Forward or Reverse - One Speed | 7.2mile/h |
|---|---|
| Travel Speed - Forward or Reverse - Two Speed | 10.3mile/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
|---|
| Inside Cab** | 83dB(A) |
|---|---|
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** | 104dB(A) |
