Bore | 3.9in |
---|---|
Displacement | 221in³ |
Engine Model | Cat C3.6TA (turbocharged, aftercooled) |
Gross Power - SAE J1995:2014 | 100hp |
Net Power - ISO 9249 | 99hp |
Net Power - SAE 1349 | 100hp |
Note | Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternato |
Peak Torque - 1,600 rpm - SAE J1995 | 333lb/ft |
Stroke | 4.7in |
Breakout Force - Lift Cylinder | 6349lb |
---|---|
Breakout Force - Tilt Cylinder | 8267lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
Rated Operating Capacity | 3557lb |
Rated Operating Capacity with Optional Counterweight | 3914lb |
Tipping Load | 7114lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
---|---|
Operating Weight | 10441lb |
Bucket Pin Height - Carry Position | 8.7in |
---|---|
Bucket Pin Height - Maximum Lift | 133.5in |
Bucket Pin Reach - Maximum Lift | 12.6in |
Clearance at Maximum Lift and Dump | 105.4in |
Departure Angle | 23.6° |
Ground Clearance | 8in |
Height - Top of Cab | 86.2in |
Length - With Bucket on Ground | 153.9in |
Length - Without Bucket | 128.7in |
Maximum Dump Angle | 43.5° |
Maximum Overall Height | 164.3in |
Maximum Reach - With Arms Parallel to Ground | 48in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, 1883 mm (74 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, enclosed cab with glass door, mechanical suspension s |
Rack Back Angle - Maximum Height | 88° |
Reach - Maximum Lift/Dump | 30.9in |
Roll Back Angle | 28° |
Turning Radius from Center - Bucket | 87.7in |
Turning Radius from Center - Coupler | 57.9in |
Turning Radius from Center - Machine Rear | 74.7in |
Vehicle Width over Tires | 72in |
Wheel Base | 54.6in |
FOPS | ISO 3449:2005 Level I |
---|---|
FOPS Level II | ISO 3449:2005 (Optional) |
ROPS | ISO 3471:2008 |
Cooling System | 4.6gal (US) |
---|---|
Diesel Exhaust Fluid (DEF) Tank | 2.9gal (US) |
Engine Crankcase | 2.4gal (US) |
Fuel Tank | 34.5gal (US) |
Hydraulic System | 10.8gal (US) |
Hydraulic Tank | 6.9gal (US) |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 69.6hp |
---|---|
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 34gal/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3500psi |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7hp |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4hp |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500psi |
Travel Speed - Forward or Reverse - One Speed | 6.6mile/h |
---|---|
Travel Speed - Forward or Reverse - Two Speed Option | 9.6mile/h |
Inside Cab* | 83 dB(A) |
---|---|
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 101 dB(A) |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
---|
Recyclability | 93% |
---|