| Bore | 3.3in |
|---|---|
| Displacement | 134.3in³ |
| Engine Model | Cat C2.2 CRDI |
| Gross Power - SAE J1995 | 67.1hp |
| Net Power - ISO 9249 | 66.5hp |
| Net Power - SAE 1349 | 65.8hp |
| Peak Torque - 1,500 rpm - SAE J1995 | 153ft·lbf |
| Stroke | 3.9in |
| Breakout Force - Tilt Cylinder | 3927lb |
|---|---|
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
| Rated Operating Capacity | 1550lb |
| Rated Operating Capacity with Optional Counterweight | 1650lb |
| Tipping Load | 3100lb |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
|---|---|
| Operating Weight | 5849lb |
| Bucket Pin Height - Carry Position | 8.5in |
|---|---|
| Bucket Pin Height - Maximum Lift | 110.9in |
| Bumper Overhang - Behind Rear Axle | 35.2in |
| Clearance at Maximum Lift and Dump | 81.8in |
| Departure Angle | 27.9° |
| Ground Clearance | 6.9in |
| Height - Top of Cab | 79.8in |
| Length - With Bucket on Ground | 127.3in |
| Length - Without Bucket | 99.4in |
| Maximum Dump Angle | 46.7° |
| Maximum Overall Height | 143.8in |
| Maximum Reach - With Arms Parallel to Ground | 50.7in |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery |
| Rack Back Angle - Maximum Height | 88.9° |
| Reach - Maximum Lift/Dump | 21in |
| Turning Radius from Center - Bucket | 77.8in |
| Turning Radius from Center - Coupler | 43.5in |
| Turning Radius from Center - Machine Rear | 59.6in |
| Vehicle Width over Tires | 58.9in |
| Wheel Base | 41.5in |
| FOPS | ISO 3449:2005 Level I |
|---|---|
| ROPS | ISO 3471:2008 |
| Chain Box - Each Side | 1.8gal (US) |
|---|---|
| Cooling System | 3.2gal (US) |
| Engine Crankcase | 2.6gal (US) |
| Fuel Tank | 15.1gal (US) |
| Hydraulic System | 11.9gal (US) |
| Hydraulic Tank | 9gal (US) |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 50.9hp |
|---|---|
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 26gal/min |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 3336psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33.5hp |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 18gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3336psi |
| Travel Speed - Forward or Reverse - One Speed | 7.6mile/h |
|---|---|
| Travel Speed - Forward or Reverse - Two Speed Option | 11.1mile/h |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
|---|
| Inside Cab** | 83dB(A) |
|---|---|
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** | 102dB(A) |
