Bore | 3.7in |
---|---|
Displacement | 203in³ |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power - SAE J1995 | 74.3hp |
Net Power | 72.9hp |
Net Power - ISO 9249 | 73.7hp |
Net Power - SAE 1349 | 72.9hp |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan. |
Peak Torque - 1,500 rpm - SAE J1995 | 195ft·lbf |
Stroke | 4.7in |
Breakout Force - Tilt Cylinder | 7291lb |
---|---|
Ground Contact Area - With 450 mm/17.7 in Track | 2272in² |
Ground Pressure - With 450 mm/17.7 in Track | 4.7psi |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
Rated Operating Capacities - 35% Tipping Load | 2890lb |
Rated Operating Capacities - 50% Tipping Load | 4130lb |
Rated Operating Capacity with Optional Counterweight | 4370lb |
Tipping Load | 8255lb |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
---|---|
Operating Weight | 10688lb |
Cooling System | 3.7gal (US) |
---|---|
Engine Crankcase | 3gal (US) |
Fuel Tank | 27.7gal (US) |
Hydraulic System | 13.7gal (US) |
Hydraulic Tank | 10.3gal (US) |
Bucket Pin Height - Carry Position | 7.5in |
---|---|
Bucket Pin Height - Maximum Lift | 125.1in |
Bucket Pin Reach - Maximum Lift | 14.5in |
Clearance at Maximum Lift and Dump | 94in |
Departure Angle | 33° |
Ground Clearance | 8.9in |
Height - Top of Cab | 83.2in |
Length - Track on Ground | 64.2in |
Length - With Bucket on Ground | 146.2in |
Length - Without Bucket | 117.9in |
Maximum Dump Angle | 51° |
Maximum Overall Height | 158.1in |
Maximum Reach - With Arms Parallel to Ground | 50in |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr |
Overall Length - Track | 83.8in |
Rack Back Angle - Maximum Height | 84° |
Reach - Maximum Lift/Dump | 30in |
Turning Radius from Center - Bucket | 88.8in |
Turning Radius from Center - Coupler | 55.5in |
Turning Radius from Center - Machine Rear | 70.7in |
Vehicle Width (450 mm/17.7 in tracks) | 78in |
FOPS | ISO 3449:2005 Level I |
---|---|
ROPS | ISO 3471:2008 |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76hp |
---|---|
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44hp |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23psi |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335psi |
Travel Speed - Forward or Reverse - One Speed | 4.5mile/h |
---|---|
Travel Speed - Forward or Reverse - Two Speed | 8.3mile/h |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
---|
Inside Cab** | 83dB(A) |
---|---|
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (2) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab*** | 103dB(A) |