Bore | 4.7in |
---|---|
Displacement | 220in² |
Engine Model | Cat® C3.6 TA (turbocharged after-cooled) |
Gross Power - SAE J1995 | 121hp |
Net Power - ISO 9249 | 120hp |
Net Power - SAE 1349 | 121hp |
Note | Maximum Gross Power ISO 14396:2002 (at 2200 RPM) – with High Flow Attachment connected: 100 kW (134.1 hp) |
Peak Torque - 1,500 rpm - SAE J1995 | 406lb/ft |
Stroke | 3.9in |
Breakout Force - Lift Cylinder | 8730lb |
---|---|
Breakout Force - Tilt Cylinder | 13920lb |
Ground Contact Area - With 450 mm/17.7 in Track | 2724in² |
Ground Pressure - With 400 mm/15.7 in Track | 5.6psi |
Ground Pressure - With 450 mm/17.7 in Track | 5psi |
Rated Operating Capacities - 35% Tipping Load | 4520lb |
Rated Operating Capacities - 50% Tipping Load | 6457lb |
Tipping Load | 12915lb |
Counterweight Adds to Operating Weight | 428lb |
---|---|
Counterweight Adds to Operating Weight - ROC (35%) | 296lb |
Counterweight Adds to Operating Weight - Tip Load | 847lb |
Note | *Operating Weight, Operating Specifications, and Dimensions are all based on 75 kg (165 lb) operator, all fluids, two speed, 2188 mm (86 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydra |
Operating Weight | 13669lb |
FOPS | ISO 3449:2005 Level I |
---|---|
FOPS Level II | ISO 3449:2005 Level II (Optional) |
ROPS | ISO 3471:2008 |
Bucket Pin Height - Carry Position | 8.2in |
---|---|
Bucket Pin Height - Maximum Lift | 146.6in |
Bucket Pin Reach - Maximum Lift | 16.3in |
Clearance at Maximum Lift and Dump | 119.6in |
Departure Angle | 26° |
Ground Clearance | 11in |
Height - Top of Cab | 87.8in |
Length - Track on Ground | 72in |
Length - With Bucket on Ground | 157.4in |
Length - Without Bucket | 132.3in |
Maximum Dump Angle | 40.5° |
Maximum Overall Height | 178in |
Maximum Reach - With Arms Parallel to Ground | 50.6in |
Overall Length - Track | 85.8in |
Rack Back Angle - Maximum Height | 89° |
Reach at Maximum Lift/Dump | 34.7in |
Roll Back Angle | 27.2° |
Turning Radius from Center - Bucket (racked) | 94.5in |
Turning Radius from Center - Coupler | 62.1in |
Turning Radius from Center - Machine Rear | 74.3in |
Vehicle Width (450 mm/17.7 in tracks) | 81.8in |
Travel Speed - Forward or Reverse - One Speed | 4.8mile/h |
---|---|
Travel Speed - Forward or Reverse - Two Speed | 7.7mile/h |
Cooling System | 4.6gal (US) |
---|---|
Diesel Exhaust Fluid (DEF) Tank | 2.9gal (US) |
Engine Crankcase | 2.4gal (US) |
Fuel Tank | 36gal (US) |
Hydraulic System | 10.8gal (US) |
Hydraulic Tank | 6.9gal (US) |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7hp |
---|---|
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4hp |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500psi |
Hydraulic Flow - XE - Hydraulic Power (calculated) | 103.9hp |
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40gal/min |
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4496klb/in² |