| Bore | 4.3in |
|---|---|
| Displacement | 171in² |
| Engine Model | Cat® C2.8TA (turbo after-cooled) |
| Gross Power - SAE J1995 | 74hp |
| Net Power - ISO 9249 | 73hp |
| Net Power - SAE 1349 | 74hp |
| Peak Torque at 1,360 rpm SAE J1995 | 280lb/ft |
| Stroke | 3.5in |
| Breakout Force - Lift Cylinder | 6739lb |
|---|---|
| Breakout Force - Tilt Cylinder | 8680lb |
| Ground Contact Area - With 450 mm/17.7 in Track | 2268in² |
| Ground Pressure - With 450 mm/17.7 in Track | 4.6psi |
| Rated Operating Capacities - 35% Tipping Load | 2823lb |
| Rated Operating Capacities - 50% Tipping Load | 4033lb |
| Rated Operating Capacity with Optional Counterweight | 2996lb |
| Tipping Load | 8066lb |
| Counterweight Adds to Operating Weight | 276lb |
|---|---|
| Counterweight Adds to Operating Weight - ROC (35%) | 173lb |
| Counterweight Adds to Operating Weight - Tip Load | 494lb |
| Enclosed Cab Adds to Operating Weight | 180lb |
| Enclosed Cab Adds to Operating Weight - ROC (35%) | 75lb |
| Enclosed Cab Adds to Operating Weight - Tip Load | 214lb |
| Note | *Operating Weight, Operating Specifications, and Dimensions are based on 2036 mm (80") low profile bucket with bolt on cutting edge, 450 mm (17.7") wide track, 75 kg (165 lb) operator, open canopy, mechanical suspension seat, HD battery with disconnect, s |
| Operating Weight | 10492lb |
| Operating Weight - ROC (35%) | 2823lb |
| Operating Weight - ROC (50%) | 4033lb |
| Operating Weight - Tip Load | 8066lb |
| Bucket Pin Height - Carry Position | 8.4in |
|---|---|
| Bucket Pin Height - Maximum Lift | 132in |
| Bucket Pin Reach - Maximum Lift | 9.8in |
| Clearance at Maximum Lift and Dump | 104.5in |
| Departure Angle | 28.2° |
| Ground Clearance | 8.5in |
| Height - Top of Cab | 83.3in |
| Length - Track on Ground | 64in |
| Length - With Bucket on Ground | 140.9in |
| Length - Without Bucket | 116.1in |
| Maximum Dump Angle | 46.4° |
| Maximum Overall Height | 164.3in |
| Maximum Reach - With Arms Parallel to Ground | 46.7in |
| Overall Length - Track | 83.7in |
| Rack Back Angle - Maximum Height | 85.3° |
| Reach at Maximum Lift/Dump | 25.1in |
| Roll Back Angle | 27° |
| Turning Radius from Center - Bucket (racked) | 87.8in |
| Turning Radius from Center - Coupler | 56.5in |
| Turning Radius from Center - Machine Rear | 68.5in |
| Vehicle Width (450 mm/17.7 in tracks) | 75.8in |
| FOPS | ISO 3449:2005 Level I |
|---|---|
| ROPS | ISO 3471:2008 |
| Cooling System | 2.8gal (US) |
|---|---|
| Engine Crankcase | 2.2gal (US) |
| Fuel Tank | 31.7gal (US) |
| Hydraulic System | 9.7gal (US) |
| Hydraulic Tank | 6.9gal (US) |
| Travel Speed - Forward or Reverse - One Speed | 5mile/h |
|---|---|
| Travel Speed - Forward or Reverse - Two Speed | 8.1mile/h |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 60.9hp |
|---|---|
| Hydraulic Flow - High Flow - Loader Hydraulic Flow | 30gal/min |
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 3500psi |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7hp |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34gal/min |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4hp |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500psi |
