| Body Weight | 64346lb |
|---|---|
| Chassis Weight | 426237lb |
| Nominal Rated Payload | 327ton (US) |
| Note (1) | Consult your tire manufacturer for maximum tire load. |
| Note (2) | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires |
| Note (3) | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. |
| Note (4) | Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg) |
| Rated Gross Machine Weight | 1150000lb |
| Bore | 6.9in |
|---|---|
| Displacement | 5187in³ |
| Emissions Rating | Fuel Optimized |
| Engine Model | Cat® C175-16 |
| Gross Power - SAE J1995 | 3500hp |
| Net Power - SAE J1349 | 3405hp |
| Note (1) | Contact factory for high altitude configuration. |
| Note (2) | Tier 4 / EU Stage V option available for regions that require these emissions standards. |
| Note (3) | Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW) |
| Optional Gross Power - SAE J1995 | 3100hp |
| Optional Gross Power - SAE J1995 (Option 2) | 2750hp |
| Rated Speed | 1800r/min |
| Standard Gross Power - SAE J1995 | 3500hp |
| Stroke | 8.7in |
| Total Reduction Ratio | 35:01:00 |
|---|
| Note (1) | Quick Change Rims optional. |
|---|---|
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Rims | 36" x 63" |
| Standard Tires | 53/80 R63 |
| Controls | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
|---|---|
| Cooling System | Variable speed, hydraulically driven cooling system |
| Generator/Alternator | Brushless, engine mounted, dual bearing |
| Top Speed - Loaded | 37mile/h |
| Total Reduction Ratio | 35:01:00 |
| Wheel Motor | High-torque AC induction, rear axle mounted |
| Dynamic Retarding Power - Continuous | 5480hp |
|---|---|
| Front Wet Disc Brake Surface Area | 20378in² |
| Load Brake | Rear service brakes |
| Parking Brake | Four-corner, Multi-disc, Spring applied, Hydraulically Released |
| Rear - Wet Disc Brake Surface Area | 30750in² |
| Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Standards | ISO 3450:2011 |
| Front Axle - Empty | 49% |
|---|---|
| Front Axle - Loaded | 33% |
| Rear Axle - Empty | 51% |
| Rear Axle - Loaded | 67% |
| Body Raise Time - High Idle | 24s |
|---|---|
| High Idle Body Lower Time - Float | 20s |
| Note (1) | Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages. |
| Note (2) | Power raise in both stages; power down in both stages possible. |
| Note (3) | Automatic body-lower modulation reduces impact on frame. |
| Pump Flow - High Idle (HAA at 1,800 rpm) | 221gal/min |
| Pump Flow - High Idle (LAA at 1,960 rpm) | 240gal/min |
| Relief Valve Setting - Raise | 3029psi |
| Total Cycle Time | 44s |
| Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate | 0.2in |
|---|---|
| Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate | 0.63in |
| Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate | 0.35in |
| Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate | 0.31in |
| Heaped (SAE 2:1) | 180-222 m³ (236-290 yd³) |
| Note | Contact your local Cat dealer for body recommendations. |
| Struck | 108-133 m³ (142-175 yd³) |
| Cooling System | 211gal (US) |
|---|---|
| Crankcase | 82gal (US) |
| Diesel Exhaust Fluid Tank | 100gal (US) |
| Final Drive - Each | 67gal (US) |
| Fuel Tank | 1300gal (US) |
| Hydraulic System - Including Tank | 385gal (US) |
| Hydraulic Tank | 296gal (US) |
| Note (1) | DEF Tank only available for EPA Tier 4 / EU Stage V engine option. |
| Canopy Width (without optional rock deflectors) | 29.75ft |
|---|---|
| Centerline Front Tire Width | 23ft |
| Centerline of Rear Dual Tire Width | 18.75ft |
| Dump Clearance | 3ft |
| Front Axle Clearance | 3.17ft |
| Front Canopy Height | 26.33ft |
| Ground Clearance | 2.67ft |
| Height - Top of ROPS | 22.25ft |
| Inside Body Width | 28.08ft |
| Loading Height - Empty | 22.92ft |
| Outside Body Width | 29.75ft |
| Overall Canopy Width | 31.5ft |
| Overall Height - Body Raised | 48.42ft |
| Overall Length | 50.75ft |
| Overall Tire Width | 28.67ft |
| Rear Axle - Clearance | 3.08ft |
| Rear Axle - Tail | 15.5ft |
| Wheel Base | 21.83ft |
| FOPS Standards | Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. |
|---|---|
| ROPS Standards (1) | Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. |
| Sound Standards (1) | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. |
|---|---|
| Sound Standards (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Note | Gross Machine Operating Weight is 521 631 kg (1,150,000 lb). |
|---|---|
| Steer Angle | 39° |
| Steering Standards | ISO 5010:2019 |
