| Body Weight | 66471lb |
|---|---|
| Chassis Weight | 295098lb |
| Nominal Rated Payload | 265ton (US) |
| Note (1) | Consult your tire manufacturer for maximum tire load |
| Note (2) | Chassis weight with full fuel and fluids standard and mandatory attachments hoist body mounting group rims and tires. |
| Rated Gross Machine Weight | 890668lb |
| Bore | 7in |
|---|---|
| Displacement | 5187in³ |
| Emissions Rating | Fuel Optimized |
| Engine Model | Cat® C175-16 |
| Gross Power - SAE J1995:2014 | 2650hp |
| Net Power - SAE J1349:2011 | 2529hp |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system exhaust system and alternator. |
| Note (3) | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
| Rated Speed | 1750r/min |
| Stroke | 9in |
| Front Axle - Empty | 51% |
|---|---|
| Front Axle - Loaded | 33% |
| Rear Axle - Empty | 49% |
| Rear Axle - Loaded | 67% |
| Differential Ratio | 1.8:1 |
|---|---|
| Note | Double reduction planetary with full floating axles. |
| Planetary Ratio | 1 |
| Total Reduction Ratio | 29 |
| Forward - 1 | 8mile/h |
|---|---|
| Forward - 2 | 10mile/h |
| Forward - 3 | 14mile/h |
| Forward - 4 | 19mile/h |
| Forward - 5 | 26mile/h |
| Forward - 6 | 37mile/h |
| Reverse | 7mile/h |
| Top Speed - Loaded | 37mile/h |
| Note | Extended life wheel stations optional. |
|---|---|
| Note (1) | Quick Change Rims optional |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Optional Tires | 813 mm (32 in) |
| Standard Tires | 737 mm (29 in) |
| Tires | 40.00 R57 46/90 R57 50/80 R57 |
| Front Wet Disc Brake Surface Area | 13907in² |
|---|---|
| Parking Brake | Four-corner Multi-disc Spring applied Hydraulically Released |
| Rear - Wet Disc Brake Surface Area | 20861in² |
| Service Brakes | Four-Corner Wet Disc Oil Cooled Hydraulically Actuated |
| Standards | (Service and Secondary) ISO 3450:2011 |
| Heaped (SAE 2:1)* | 162-190 m3 (212-249 yd3) |
|---|---|
| Note (1) | Consult your local Cat dealer for body recommendations |
| Struck | 112.6-151 m3 (147-197.5 yd3) |
| Body Lower Time - Float | 23s |
|---|---|
| Body Power Down - High Idle | 21s |
| Body Raise Time - High Idle | 22s |
| Pump Flow - High Idle | 216gal/min |
| Relief Valve Setting - Raise | 2955psi |
| Type | Twin two-stage hydraulic cylinders with snubbing valve. |
| Effective Cylinder Stroke - Front | 12in |
|---|---|
| Effective Cylinder Stroke - Rear | 7in |
| Rear axle - Oscillation | 4.9 degrees |
| Type | Self-contained nitrogen/oil cylinders pin-to-pin mounting top and bottom double shear clevis attachments |
| Brake Hoist System - Includes Tank | 347gal (US) |
|---|---|
| Cooling System | 284gal (US) |
| Crankcase | 82gal (US) |
| Diesel Exhaust Fluid Tank | 62gal (US) |
| Differential - Final Drives | 260gal (US) |
| Front Wheels - Each | 8gal (US) |
| Fuel Tank | 750gal (US) |
| Fuel Tank - Optional | 1300gal (US) |
| Steering System - Includes Tank | 77gal (US) |
| Torque Converter Sump | 27gal (US) |
| Torque Converter/Transmission System - Including Sump | 55gal (US) |
| Air Conditioning | (HFC - 134A refrigerant) 9.3 kW 31733 BTU/hr |
|---|---|
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer |
| Heater / Defroster | 36510Btu/h |
| Note | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
| ROPS Standards (2) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer |
| Sound Standards (1) | The operator sound pressure level 74 dB(A) complies with ISO 6394 and ISO 6396. |
|---|
| Steer Angle | 36° |
|---|---|
| Steering Standards | ISO 5010:2019 |
| Turning Diameter - Front | 93ft |
