| Base Power (1st Gear) - Net - Metric | 181hp |
|---|---|
| Bore | 4.5in |
| Derating Altitude | 10000ft |
| Displacement | 567.5in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat® C9.3 |
| High - Ambient Capability | 122°F |
| High Ambient - Fan Speed - Maximum | 1,550 rpm |
| High Ambient - Fan Speed - Minimum | 500 rpm |
| High Ambient - Fan Speed - Standard | 1,400 rpm |
| Maximum Torque - VHP Plus | 840lb/ft |
| Net Power Range (Tier 4) | 179hp |
| Number of Cylinders | 6 |
| Speed at Rated Power | 2,000 rpm |
| Standard Capability | 109°F |
| Stroke | 5.9in |
| Torque Rise | 38% |
| VHP Plus - Gear - Net Power - Forward 1st | 179hp |
| VHP Plus - Gear - Net Power - Forward 2nd | 189hp |
| VHP Plus - Gear - Net Power - Forward 3rd | 200hp |
| VHP Plus - Gear - Net Power - Forward 4th | 210hp |
| VHP Plus - Gear - Net Power - Forward 5th | 215hp |
| VHP Plus - Gear - Net Power - Forward 6th | 220hp |
| VHP Plus - Gear - Net Power - Forward 7th | 225hp |
| VHP Plus - Gear - Net Power - Forward 8th | 231hp |
| VHP Plus - Gear - Net Power - Reverse 1st | 179hp |
| VHP Plus - Gear - Net Power - Reverse 2nd | 189hp |
| VHP Plus - Gear - Net Power - Reverse 3rd-6th | 200hp |
| VHP Plus Range - Net | 133-172 kW (179-231 hp) |
| VHP Plus Range - Net - Metric | 133-172 kW (181-234 hp) |
| Gross Vehicle Weight - Base - Front Axle | 9343lb |
|---|---|
| Gross Vehicle Weight - Base - Rear Axle | 28077lb |
| Gross Vehicle Weight - Base - Total | 37420lb |
| Gross Vehicle Weight - Maximum - Front Axle | 17075lb |
| Gross Vehicle Weight - Maximum - Rear Axle | 38069lb |
| Gross Vehicle Weight - Maximum - Total | 55144lb |
| Operating Weight - Typically Equipped | 42647lb |
| Operating Weight - Typically Equipped - Front Axle | 12055lb |
| Operating Weight - Typically Equipped - Rear Axle | 30592lb |
| Operating Weight - Typically Equipped - Total | 42647lb |
| Arc Radius | 16.3in |
|---|---|
| Blade Down Pressure - Base GVW | 16038lb |
| Blade Down Pressure - Maximum GVW | 29309lb |
| Blade Pull - Base GVW | 25269lb |
| Blade Pull - Maximum GVW | 34262lb |
| Blade Width | 12ft |
| Cutting Edge Thickness | 0.6in |
| Cutting Edge Width | 6in |
| End Bit - Thickness | 0.6in |
| End Bit - Width | 6in |
| Moldboard - Blade Width | 12ft |
| Moldboard - Height | 24in |
| Moldboard - Thickness | 0.87in |
| Throat Clearance | 6.5in |
| Articulation Angle - Left/Right | 20° |
|---|---|
| Forward - 1st | 2.5mile/h |
| Forward - 2nd | 3.4mile/h |
| Forward - 3rd | 5mile/h |
| Forward - 4th | 6.9mile/h |
| Forward - 5th | 10.6mile/h |
| Forward - 6th | 14.5mile/h |
| Forward - 7th | 19.9mile/h |
| Forward - 8th | 29mile/h |
| Reverse - 1st | 2mile/h |
| Reverse - 2nd | 3.7mile/h |
| Reverse - 3rd | 5.4mile/h |
| Reverse - 4th | 8.4mile/h |
| Reverse - 5th | 15.7mile/h |
| Reverse - 6th | 23mile/h |
| Steering Range - Left/Right | 50° |
| Top Speed - Forward | 29mile/h |
| Top Speed - Reverse | 23mile/h |
| Turning Radius - Outside Front Tires | 25.59ft |
| Circle Drive Housing | 1.8gal (US) |
|---|---|
| Cooling System | 15gal (US) |
| Diesel Exhaust Fluid | 5.8gal (US) |
| Engine Oil | 7.9gal (US) |
| Front Wheel Spindle Bearing Housing | 0.13gal (US) |
| Fuel Capacity | 104gal (US) |
| Hydraulic System - Tank | 16.9gal (US) |
| Hydraulic System - Total | 26.4gal (US) |
| Tandem Housing - Each | 20gal (US) |
| Transmission - Differential - Final Drives | 18.5gal (US) |
| Brakes - Parking | Multiple Oil Disc |
|---|---|
| Brakes - Secondary | Dual Circuit |
| Brakes - Service | Multiple Oil Disc |
| Brakes - Service - Surface Area | 3565in² |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Transmission | APECS, Direct Drive, Powershift |
| Circuit Type | Parallel |
|---|---|
| Maximum System Pressure | 3500psi |
| Pump Output | 55.7gal/min |
| Pump Type | Variable Piston |
| Reservoir Tank Capacity | 16.9gal (US) |
| Standby Pressure | 885psi |
| Circle - Blade Beam Thickness | 1.6in |
|---|---|
| Circle - Diameter | 60.2in |
| Circle - Height | 5.4in |
| Drawbar - Height | 6in |
| Drawbar - Thickness | 0.5in |
| Drawbar - Width | 3in |
| Front Axle - Height to Center | 23.5in |
| Front Axle - Total Oscillation per Side | 32° |
| Front Axle - Wheel Lean - Left/Right | 18° |
| Front Frame Structure - Height | 12.6in |
| Front Frame Structure - Width | 12in |
| Front-Top/Bottom Plate - Thickness | 0.87in |
| Front-Top/Bottom Plate - Width | 12in |
| Blade Tip Range - Backward | 5° |
|---|---|
| Blade Tip Range - Forward | 40° |
| Circle Centershift - Left | 27.4in |
| Circle Centershift - Right | 28.7in |
| Maximum Blade Position Angle | 90° |
| Maximum Depth of Cut | 28.1in |
| Maximum Lift Above Ground | 18.9in |
| Maximum Shoulder Reach Outside of Tires - Left | 70.5in |
| Maximum Shoulder Reach Outside of Tires - Right | 77.9in |
| Moldboard Sideshift - Left | 20.1in |
| Moldboard Sideshift - Right | 26in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
|---|
| Machine Length Increase, Beam Raised | 40.6in |
|---|---|
| Penetration Force | 20812lb |
| Pry-Out Force | 27794lb |
| Ripper Shank Holder Spacing | 21in |
| Ripper Shank Holders | 5 |
| Ripping Depth - Maximum | 16.8in |
| Front, V-Type - Working Width | 47.4in |
|---|---|
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6in |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5/11 |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4in |
| Front, V-Type, 5 or 11 Tooth - Working Width | 40.6in |
| Mid, V-Type - Scarifier Shank Holder Spacing | 4.6in |
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Mid, V-Type - Scarifying Depth, Maximum | 11.5in |
| Mid, V-Type - Working Width | 46.6in |
| Rear - Scarifier Shank Holder Spacing | 10.5in |
| Rear - Scarifier Shank Holders | 9 |
| Rear - Scarifying Depth, Maximum | 16.8in |
| Rear - Working Width | 84in |
| Brakes | ISO 3450 |
|---|---|
| ROPS/FOPS | ISO 3471/ISO 3449 |
| Sound | ISO 6394; ISO 6395 |
| Steering | ISO 5010 |
| Drive Chain Pitch | 2in |
|---|---|
| Height | 19.9in |
| Sidewall Thickness - Inner | 0.63in |
| Sidewall Thickness - Outer | 0.71in |
| Tandem Oscillation - Front Down | 25° |
| Tandem Oscillation - Front Up | 15° |
| Wheel Axle Spacing | 60in |
| Width | 7.9in |
| Ground Clearance - Rear Axle | 13.3in |
|---|---|
| Height - Exhaust Stack | 128in |
| Height - Front Axle Center | 23.5in |
| Height - Top of Cab | 130in |
| Height - Top of Cylinders | 120in |
| Length - Between Tandem Axles | 60in |
| Length - Counterweight to Ripper | 399in |
| Length - Front Axle to Mid Tandem | 241in |
| Length - Front Axle to Moldboard | 100in |
| Length - Front Tire to Rear of Machine | 351in |
| Width - Outside Front Tires | 98.9in |
| Width - Outside Rear Tires | 98.9in |
| Width - Tire Center Lines | 84.3in |
