| Base Power (1st Gear) - Net | 238hp |
|---|---|
| Bore | 5.1in |
| Displacement | 763in³ |
| Emissions | Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
| Engine Model | Cat C13 |
| Maximum Altitude - Full Power | 13900ft |
| Maximum Altitude - Full Power (Tier 2) | 12049ft |
| Maximum Altitude - Full Power (Tier 3) | 14349ft |
| Maximum Torque - VHP Plus | 1137lb/ft |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Note (2) | Optimized VHP Plus is standard for the 14M3. |
| Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) | Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
| Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Number of Cylinders | 6 |
| Speed at Rated Power | 1,850 rpm |
| Standard - Fan Speed - Maximum | 1,600 rpm |
| Standard - Fan Speed - Minimum | 550 rpm |
| Standard Capability | 122°F |
| Stroke | 6.2in |
| Torque Rise | 41% |
| Gross Vehicle Weight - Base* - Front Axle | 13994lb |
|---|---|
| Gross Vehicle Weight - Base* - Rear Axle | 36994lb |
| Gross Vehicle Weight - Base* - Total | 50980lb |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 15245lb |
| Gross Vehicle Weight - Typically Equipped - Rear Axle | 42005lb |
| Gross Vehicle Weight - Typically Equipped - Total | 57250lb |
| Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
| Operating Weight - Typically Equipped | 57250lb |
| Arc Radius | 16.3in |
|---|---|
| Blade Height - With Cutting Edge | 24.9in |
| Blade Height - Without Cutting Edge | 23in |
| Blade Width | 14ft |
| Blade Width - With End Bits | 169in |
| Blade Width - Without End Bits | 164in |
| Throat Clearance | 4.6in |
| Blade Tip Range - Backward | 5° |
|---|---|
| Blade Tip Range - Forward | 40° |
| Circle Centershift - Left | 25.6in |
| Circle Centershift - Right | 20.5in |
| Maximum Depth of Cut | 23.3in |
| Maximum Lift Above Ground | 16.5in |
| Maximum Shoulder Reach Outside of Tires - Left | 73.6in |
| Maximum Shoulder Reach Outside of Tires - Right | 78.9in |
| Moldboard Sideshift - Left | 29.1in |
| Moldboard Sideshift - Right | 31.1in |
| Circle - Outer Diameter | 71.7in |
|---|---|
| Front Axle - Total Oscillation per Side | 32° |
| Front Axle - Wheel Lean - Left/Right | 17.1° |
| Circle Drive | 1.8gal (US) |
|---|---|
| Cooling System | 15.9gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 5.8gal (US) |
| Fuel Tank | 109.9gal (US) |
| Hydraulic System | 33gal (US) |
| Transmission and Differential | 23.5gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
|---|
