Base Power (1st Gear) - Net - Metric | 181hp |
---|---|
Bore | 4.5in |
Derating Altitude | 10000ft |
Displacement | 567.5in³ |
Emissions | U.S. EPA Tier 4 Final/EU Stage V |
Engine Model | Cat® C9.3 |
High - Ambient Capability | 122°F |
High Ambient - Fan Speed - Maximum | 1,550 rpm |
High Ambient - Fan Speed - Minimum | 500 rpm |
High Ambient - Fan Speed - Standard | 1,400 rpm |
Maximum Torque - VHP Plus | 840lb/ft |
Net Power Range (Tier 4) | 179hp |
Number of Cylinders | 6 |
Speed at Rated Power | 2,000 rpm |
Standard Capability | 109°F |
Stroke | 5.9in |
Torque Rise | 38% |
VHP Plus - Gear - Net Power - Forward 1st | 179hp |
VHP Plus - Gear - Net Power - Forward 2nd | 189hp |
VHP Plus - Gear - Net Power - Forward 3rd | 200hp |
VHP Plus - Gear - Net Power - Forward 4th | 210hp |
VHP Plus - Gear - Net Power - Forward 5th | 215hp |
VHP Plus - Gear - Net Power - Forward 6th | 220hp |
VHP Plus - Gear - Net Power - Forward 7th | 225hp |
VHP Plus - Gear - Net Power - Forward 8th | 231hp |
VHP Plus - Gear - Net Power - Reverse 1st | 179hp |
VHP Plus - Gear - Net Power - Reverse 2nd | 189hp |
VHP Plus - Gear - Net Power - Reverse 3rd-6th | 200hp |
VHP Plus Range - Net | 133-172 kW (179-231 hp) |
VHP Plus Range - Net - Metric | 133-172 kW (181-234 hp) |
Gross Vehicle Weight - Base - Front Axle | 9343lb |
---|---|
Gross Vehicle Weight - Base - Rear Axle | 28077lb |
Gross Vehicle Weight - Base - Total | 37420lb |
Gross Vehicle Weight - Maximum - Front Axle | 17075lb |
Gross Vehicle Weight - Maximum - Rear Axle | 38069lb |
Gross Vehicle Weight - Maximum - Total | 55144lb |
Operating Weight - Typically Equipped | 42647lb |
Operating Weight - Typically Equipped - Front Axle | 12055lb |
Operating Weight - Typically Equipped - Rear Axle | 30592lb |
Operating Weight - Typically Equipped - Total | 42647lb |
Arc Radius | 16.3in |
---|---|
Blade Down Pressure - Base GVW | 16038lb |
Blade Down Pressure - Maximum GVW | 29309lb |
Blade Pull - Base GVW | 25269lb |
Blade Pull - Maximum GVW | 34262lb |
Blade Width | 12ft |
Cutting Edge Thickness | 0.6in |
Cutting Edge Width | 6in |
End Bit - Thickness | 0.6in |
End Bit - Width | 6in |
Moldboard - Blade Width | 12ft |
Moldboard - Height | 24in |
Moldboard - Thickness | 0.87in |
Throat Clearance | 6.5in |
Articulation Angle - Left/Right | 20° |
---|---|
Forward - 1st | 2.5mile/h |
Forward - 2nd | 3.4mile/h |
Forward - 3rd | 5mile/h |
Forward - 4th | 6.9mile/h |
Forward - 5th | 10.6mile/h |
Forward - 6th | 14.5mile/h |
Forward - 7th | 19.9mile/h |
Forward - 8th | 29mile/h |
Reverse - 1st | 2mile/h |
Reverse - 2nd | 3.7mile/h |
Reverse - 3rd | 5.4mile/h |
Reverse - 4th | 8.4mile/h |
Reverse - 5th | 15.7mile/h |
Reverse - 6th | 23mile/h |
Steering Range - Left/Right | 50° |
Top Speed - Forward | 29mile/h |
Top Speed - Reverse | 23mile/h |
Turning Radius - Outside Front Tires | 25.59ft |
Circle Drive Housing | 1.8gal (US) |
---|---|
Cooling System | 15gal (US) |
Diesel Exhaust Fluid | 5.8gal (US) |
Engine Oil | 7.9gal (US) |
Front Wheel Spindle Bearing Housing | 0.13gal (US) |
Fuel Capacity | 104gal (US) |
Hydraulic System - Tank | 16.9gal (US) |
Hydraulic System - Total | 26.4gal (US) |
Tandem Housing - Each | 20gal (US) |
Transmission - Differential - Final Drives | 18.5gal (US) |
Brakes - Parking | Multiple Oil Disc |
---|---|
Brakes - Secondary | Dual Circuit |
Brakes - Service | Multiple Oil Disc |
Brakes - Service - Surface Area | 3565in² |
Forward/Reverse Gears | 8 Forward/6 Reverse |
Transmission | APECS, Direct Drive, Powershift |
Circuit Type | Parallel |
---|---|
Maximum System Pressure | 3500psi |
Pump Output | 55.7gal/min |
Pump Type | Variable Piston |
Reservoir Tank Capacity | 16.9gal (US) |
Standby Pressure | 885psi |
Circle - Blade Beam Thickness | 1.6in |
---|---|
Circle - Diameter | 60.2in |
Circle - Height | 5.4in |
Drawbar - Height | 6in |
Drawbar - Thickness | 0.5in |
Drawbar - Width | 3in |
Front Axle - Height to Center | 23.5in |
Front Axle - Total Oscillation per Side | 32° |
Front Axle - Wheel Lean - Left/Right | 18° |
Front Frame Structure - Height | 12.6in |
Front Frame Structure - Width | 12in |
Front-Top/Bottom Plate - Thickness | 0.87in |
Front-Top/Bottom Plate - Width | 12in |
Blade Tip Range - Backward | 5° |
---|---|
Blade Tip Range - Forward | 40° |
Circle Centershift - Left | 27.4in |
Circle Centershift - Right | 28.7in |
Maximum Blade Position Angle | 90° |
Maximum Depth of Cut | 28.1in |
Maximum Lift Above Ground | 18.9in |
Maximum Shoulder Reach Outside of Tires - Left | 70.5in |
Maximum Shoulder Reach Outside of Tires - Right | 77.9in |
Moldboard Sideshift - Left | 20.1in |
Moldboard Sideshift - Right | 26in |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
---|
Machine Length Increase, Beam Raised | 40.6in |
---|---|
Penetration Force | 20812lb |
Pry-Out Force | 27794lb |
Ripper Shank Holder Spacing | 21in |
Ripper Shank Holders | 5 |
Ripping Depth - Maximum | 16.8in |
Front, V-Type - Working Width | 47.4in |
---|---|
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6in |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5/11 |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4in |
Front, V-Type, 5 or 11 Tooth - Working Width | 40.6in |
Mid, V-Type - Scarifier Shank Holder Spacing | 4.6in |
Mid, V-Type - Scarifier Shank Holders | 11 |
Mid, V-Type - Scarifying Depth, Maximum | 11.5in |
Mid, V-Type - Working Width | 46.6in |
Rear - Scarifier Shank Holder Spacing | 10.5in |
Rear - Scarifier Shank Holders | 9 |
Rear - Scarifying Depth, Maximum | 16.8in |
Rear - Working Width | 84in |
Brakes | ISO 3450 |
---|---|
ROPS/FOPS | ISO 3471/ISO 3449 |
Sound | ISO 6394; ISO 6395 |
Steering | ISO 5010 |
Drive Chain Pitch | 2in |
---|---|
Height | 19.9in |
Sidewall Thickness - Inner | 0.63in |
Sidewall Thickness - Outer | 0.71in |
Tandem Oscillation - Front Down | 25° |
Tandem Oscillation - Front Up | 15° |
Wheel Axle Spacing | 60in |
Width | 7.9in |
Ground Clearance - Rear Axle | 13.3in |
---|---|
Height - Exhaust Stack | 128in |
Height - Front Axle Center | 23.5in |
Height - Top of Cab | 130in |
Height - Top of Cylinders | 120in |
Length - Between Tandem Axles | 60in |
Length - Counterweight to Ripper | 399in |
Length - Front Axle to Mid Tandem | 241in |
Length - Front Axle to Moldboard | 100in |
Length - Front Tire to Rear of Machine | 351in |
Width - Outside Front Tires | 98.9in |
Width - Outside Rear Tires | 98.9in |
Width - Tire Center Lines | 84.3in |