| Bore | 4.1in |
|---|---|
| Derating Altitude | 9842ft |
| Displacement | 268.5in³ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V emission standards |
| Engine Model | Cat® C4.4 |
| Engine Power AWD (ISO 14396) | 128kW |
| Maximum Torque | 544lb/ft |
| Net Power - ISO 9249/SAE J1349 | 171hp |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, m |
| Stroke | 5in |
| Torque Rise - ISO 9294 | 21% |
| Note | * Typically equipped machine weight is calculated with full fluids, ROPS HVAC CAB, 12' basic blade, push plate, ripper, 14-24 tires on multi-piece rims and operator. |
|---|---|
| Operating Weight - Typically Equipped | 31958lb |
| Operating Weight - Typically Equipped - Front Axle | 8708lb |
| Operating Weight - Typically Equipped - Rear Axle | 23250lb |
| Arc Radius | 16.3in |
|---|---|
| Blade Height | 20in |
| Blade Width | 12ft |
| Cutting Edge Width | 6in |
| End Bit - Width | 152in |
| Throat Clearance | 4.7in |
| All-Wheel Drive (AWD) Weight | 36376lb |
|---|
| Length of Machine* | 391.4in |
|---|---|
| Maximum Height | 149.1in |
| Note | *Typically equipped with push block and ripper. |
| Width | 94.6in |
| Blade Tip Range - Backward | 5° |
|---|---|
| Blade Tip Range - Forward | 40° |
| Circle Centershift - Left | 25.8in |
| Circle Centershift - Right | 25.8in |
| Maximum Depth of Cut | 30.5in |
| Maximum Lift Above Ground | 16.1in |
| Moldboard Sideshift - Left | 20.2in |
| Moldboard Sideshift - Right | 26.1in |
| Circle Drive with Slip Clutch | 1.8gal (US) |
|---|---|
| Circle Drive without Slip Clutch | 0.4gal (US) |
| Cooling System | 10.3gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 3.2gal (US) |
| Engine Crankcase | 2gal (US) |
| Fuel Tank | 71gal (US) |
| Hydraulic System | 11.9gal (US) |
| Transmission | 4gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
|---|
| Recyclability | 92% |
|---|
| Forward/Reverse Gears | 6 Forward / 3 Reverse |
|---|---|
| Transmission | Countershaft Torque, Converter Powershift |
| Articulation Angle - Left/Right | 20� left or right |
|---|---|
| Steering Range - Left/Right | 47.5° left or right |
