| Bore | 5.7in³ |
|---|---|
| Displacement | 1106in³ |
| Emissions | U.S. EPA Tier 2 or Tier 3 equivalent |
| Engine Model | Cat® C18 |
| Engine Power - Gross SAE J1995 | 487hp |
| Engine Power - ISO 14396 | 479hp |
| Engine Power - Net SAE J1349/ISO 9249 | 452hp |
| Note (1) | All engine ratings apply at 1,750 rpm. |
| Note (2) | No derating required up to 4267 m (14,000 ft) altitude. |
| Stroke | 7.2in |
| Note (1) | D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
|---|---|
| Note (2) | D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
| Operating Weight | 110225lb |
| Shipping Weight | 84373lb |
| Ground Clearance | 18.1in |
|---|---|
| Ground Contact Area | 45.6ft² |
| Grouser Height | 3.3in |
| Length - Track on Ground | 136.6in |
| Number of Carrier Rollers | 1 per side (optional) |
| Pitch | 9.4in |
| Shoe Type | Extreme Service |
| Shoes/Side | 43 |
| Track Gauge | 88.6in |
| Track Rollers/Side | 8 |
| Width - Shoe | 24in |
| FOPS | Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
|---|---|
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
| Sound | The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling |
| Sound (1) | The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c |
| Sound (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
| Brake Count | 8 |
|---|---|
| Brake Diameter | 15.5in |
| Brake Type | Spring Applied Wet Disc |
| Steering Type | Differential |
| Bore | 5.7in³ |
|---|---|
| Displacement | 1106in³ |
| Emissions | U.S. EPA Tier 4 / EU Stage V |
| Engine Model | Cat® C18 |
| Engine Power - Gross SAE J1995 | 477hp |
| Engine Power - ISO 14396 | 468hp |
| Engine Power - Net SAE J1349/ISO 9249 | 440hp |
| Note (1) | All Engine ratings apply at 1,750 rpm. |
| Note (2) | No derating required up to 2499 m (8,200 ft). |
| Stroke | 7.2in³ |
| Cooling System | 21gal (US) |
|---|---|
| DEF Tank (Tier 4 only) | 9.5gal (US) |
| Engine Crankcase* | 10gal (US) |
| Final Drives (each) | 4gal (US) |
| Fuel Tank (Fast Fill) | 248gal (US) |
| Fuel Tank (Splash Fill) | 254gal (US) |
| Hydraulic System Tank | 24gal (US) |
| Note | *With oil filters. |
| Note 2 | Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or |
| Note 3 | All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
| Note 4 | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Pivot Shaft Oil | 8gal (US) |
| Powertrain | 40gal (US) |
| Roller Frames (each) | 12gal (US) |
| Fan Pump | 21gal/min |
|---|---|
| Lift Cylinder Relief Valve Setting | 3800lbf/in |
| Note (1) | Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
| Note (2) | Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
| Note (3) | Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
| Pump Output - Steering | 96gal/min |
| Pump Type | Piston-type geared to flywheel |
| Ripper - Lift - Relief Valve Setting | 3800psi |
| Ripper - Pitch - Relief Valve Setting | 3800psi |
| Steering System - Pressure | 5874psi |
| Tank Capacity | 24gal/min |
| Tilt Cylinder Flow - Head End Flow | 53gal/min |
| Tilt Cylinder Flow - Rod End Flow | 53gal/min |
| Tilt Cylinder Relief Valve Setting | 2799psi |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
|---|
| 1.0 Forward | 2.2mile/h |
|---|---|
| 1.0 Reverse | 2.7mile/h |
| 2.0 Forward | 3.9mile/h |
| 2.0 Reverse | 4.8mile/h |
| 3.0 Forward | 6.8mile/h |
| 3.0 Reverse | 8.4mile/h |
| Type | Planetary powershift |
| Blade Capacity (SAE J1265) | 17.8yd³ |
|---|---|
| Blade Height | 76.1in |
| Blade Weight | 10587lb |
| Blade Width (over end bits) | 171.3in |
| Ground Clearance at Full Lift | 56in |
| Maximum Digging Depth | 23.9in |
| Maximum Tilt | 37in |
| Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
| Total Operating Weight* (with blade and single-shank ripper) | 110205lb |
| Blade Capacity (SAE J1265) | 21.7yd³ |
|---|---|
| Blade Height | 76.1in |
| Blade Weight | 12016lb |
| Blade Width (over end bits) | 184.3in |
| Ground Clearance at Full Lift | 56in |
| Maximum Digging Depth | 23.9in |
| Maximum Tilt | 39.9in |
| Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
| Total Operating Weight* (with blade and single-shank ripper) | 111362lb |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.7in |
|---|---|
| Maximum penetration depth (standard tip) | 48.5in |
| Maximum penetration force * (shank vertical) | 35520lbf |
| Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
| Number of Pockets | 1 |
| Pryout Force | 74637lbf |
| Total Operating Weight* (with SU Blade and noted ripper) | 110205lb |
| Weight | 10701lb |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 32.2in |
|---|---|
| Maximum penetration depth (standard tip) | 68in |
| Maximum penetration force * (shank vertical) | 38667lbf |
| Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
| Number of Pockets | 1 |
| Pryout Force | 74412lbf |
| Total Operating Weight* (with SU Blade and noted ripper) | 110485lb |
| Weight | 10981lb |
| Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.6in |
|---|---|
| Maximum Penetration - Standard Tip | 31.4in |
| Maximum Penetration Force - Shank Vertical | 34621lbf |
| Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
| Number of Pockets | 3 |
| Pry-Out Force - Multi-Shank Ripper with One Tooth | 81156lbf |
| Total Operating Weight* - With SU-Blade and Ripper | 111739lb |
| Weight | 12136lb |
| Drawbar Height (Center of Clevis)* | 30in |
|---|---|
| Ground Clearance* | 18.1in |
| Height - FOPS Cab* | 150.4in |
| Height - ROPS/Canopy* | 157.5in |
| Height - Top of Stack* | 152.6in |
| Length - Basic Tractor - With Drawbar | 206.4in |
| Length - Basic Tractor - With Winch | 218.3in |
| Length - Track on Ground | 136.6in |
| Length - With Multi-Shank Ripper | 257.4in |
| Length - With SU-Blade** | 259.9in |
| Length - With Single-Shank Ripper | 257in |
| Length - With U-Blade | 274.3in |
| Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
| Overall Length - Basic Tractor | 193.3in |
| Overall Length - SU-Blade/SS Ripper | 323.6in |
| Track Gauge | 88.6in |
| Width - Over Trunnions | 130.3in |
| Width - Without Trunnions - Standard Shoe | 113in |
| Drum Width | 12.6in |
|---|---|
| Maximum Drum Capacity - Optional Cable Length | 204ft |
| Maximum Drum Capacity - Recommended Cable Length | 257in |
| Note | *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
| Note (2) | Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
| Oil Capacity | 4gal (US) |
| Weight* | 3950lb |
| Winch Model | PA 140VS |
| Wire Cable Diameter - Optional | 1.25ft |
| Wire Cable Diameter - Recommended | 1.13in |
| Wire Cable Ferrule Size - Length | 2.8in |
| Wire Cable Ferrule Size - Outside Diameter | 2.4in |
