New 6015 Hydraulic Shovel in North Carolina

Back to

The Cat® 6015 Hydraulic Shovel lets you move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With class-leading tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

Pricing: Contact for Pricing

Request a quote

Request a New Equipment Quote

Fill out this form below and we will get back to you within 1 to 2 business days! Alternatively, give us a call at 833-286-3561


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Request Demo
    Bucket Payload 16.1ton (US)
    Engine Output - SAE J1995 824hp
    Note Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.
    Operating Weight 154.3ton (US)
    Engine Model Cat® C27
    Gross Power - SAE J1995 824hp
    Net Power - SAE J1349 746hp
    Bore 5.4in
    Displacement 1648in³
    Number of Cylinders 12
    Stroke 6in
    Engine Model Cat® C27
    Gross Power - SAE J1995 839hp
    Net Power - SAE J1349 746hp
    Aspiration Turbocharged and air-to-air aftercooled
    Bore 5.4in
    Displacement 1648in³
    Number of Cylinders 12
    Stroke 6in
    Operating Weight 154ton (US)
    Ground Pressure 23.6psi
    Note Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
    Operating Weight 308000lb
    Extra Wide 39in
    Number of Carrier Rollers - Each Side 3
    Number of Shoes - Each Side 46
    Number of Track Rollers - Each Side 9
    Standard 28in
    Track Pads Double grouser
    Wide 36in
    Gradeability - Travel Drives Approximately 42%
    Hydraulic Track Tensioning With accumulator
    Maximum Drawbar Pull 179847lbf
    Maximum Drawbar Pull - Forward 192886lbf
    Maximum Drawbar Pull - Reverse 220987lbf
    Travel Speed - Two Stages - 1st Stage - Maximum 1.4mile/h
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.1mile/h
    Cooling System 44gal (US)
    Engine Oil 23gal (US)
    Fuel Tank 449gal (US)
    Grease Tank 18gal (US)
    Hydraulic System - Including Tank 463gal (US)
    Hydraulic Tank 253gal (US)
    Swing Drive 2.4gal (US)
    Alternator Rating 150 A (24 V) in total
    Batteries 4 × 200 Ah (12 V each)
    Components (1) Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
    Components (2) Four maintenance free batteries
    Components (3) Lockable battery isolation switch
    Components (4) 5 LED service lights
    Components (5) 14 LED high-brightness working lights
    Components (6) 2 electric horns
    Components (7) Two (2) lights for rear end
    Components (8) One (1) light for machine deck/service
    Components (9) One (1) beacon light on cabin roof
    System Voltage 24 V
    Engine Fan Pump 1 × variable swash plate pump
    Engine Fan Pump - Maximum Flow, Engine Fan 53.1gal/min
    Engine Fan Pump - Maximum Pressure, Engine Fan 3191psi
    Filters (1) Full-flow high-pressure filters (200 μm) for main pumps
    Filters (2) Full-flow filters (20 μm) for complete return circuit
    Filters (3) Pressure filters (16 μm) for servo circuit
    Filters (4) Full-flow filters (6 μm) for engine cooling return circuit
    Filters (5) Swing charge filter (15 μm)
    Filters (6) Pump case return screens (125 μm)
    Hydraulic Fan Pump 1 × variable swash plate pump
    Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan 22.7gal/min
    Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan 1958psi
    Hydraulic Oil Cooling - Diameter of Fan 40in
    Hydraulic Oil Cooling - Maximum Flow 284gal/min
    Main Pumps 3 × variable swash plate pumps
    Main Pumps - Maximum Pressure - Attachment 4641psi
    Main Pumps - Maximum Pressure - Travel 4641psi
    Main Pumps - Maximum Total Oil Flow 407gal/min
    Pilot Pump 1 × gear pump
    Pilot Pump - Maximum Flow, Pilot 40.4gal/min
    Pilot Pump - Maximum Pressure, Pilot 1378psi
    Swing Pump 1 × variable swash plate pump
    Swing Pump - Maximum Flow - Swing 127gal/min
    Swing Pump - Maximum Pressure - Swing 5294psi
    Features (1) Closed-loop swing circuit with speed control
    Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
    Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
    Maximum Swing Speed 4.9r/min
    Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released
    Swing Drive Two (2) compact planetary transmissions with axial piston motors
    Swing Ring Cross roller bearing with sealed internal gearing
    Emissions U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
    Equipped With (1) Emergency stop
    Equipped With (2) Quick couplings for: Diesel fuel and Grease
    Feature Accessible from ground level
    Components (1) Forged double-grouser track pads
    Components (2) Chain links connected by hardened pins and bushings
    Components (3) Postive Pin Retention (PPR2) sealed and greased track design
    Components (4) All running surfaces of sprockets, idlers, rollers and track chain links hardened
    Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator
    Components (6) Automatic hydraulic retarder valve to prevent overspeed on downhill travel
    Components (7) Audible travel alarm
    Gradeability - Travel Drives 38°/78% (SAE J1309)
    Hydraulic Track Tensioning With accumulator
    Maximum Drawbar Pull - Forward 192886lbf
    Maximum Drawbar Pull - Reverse 220987lbf
    Maximum Tractive Force 197157lbf
    Number of Carrier Rollers - Each Side 3
    Number of Shoes - Each Side 46
    Number of Track Rollers - Each Side 9
    Travel Speed - Two Stages - 1st Stage - Maximum 1.6mile/h
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.3mile/h
    Components (1) Pressurized operator station with positive filtration
    Components (10) Radio with MP3 auxiliary audio port
    Components (11) Two stereo speakers
    Components (12) Storage shelf suitable for lunch or toolbox
    Components (13) Color LCD display with warning, filter/fluid change, and working hour information
    Components (14) Adjustable armrest
    Components (15) Height-adjustable joystick consoles
    Components (16) Neutral lever (lock out) for all controls
    Components (17) Travel control pedals with removable hand levers
    Components (18) Two power outlets, 10 amp (total)
    Components (19) Laminated glass front upper window and tempered other windows
    Components (2) Heated cab mirror
    Components (3) Sliding upper door window (left-hand cab door)
    Components (4) Glass-breaking safety hammer
    Components (5) Removable lower windshield with in cab storage bracket
    Components (6) Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
    Components (7) Beverage holder
    Components (8) Literature holder
    Components (9) AM/FM radio
    Capacity - Grease Barrel 18gal (US)
    Type (1) Central bank lubrication system
    Type (2) Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
    Type (3) Standard grease reel on machine for bucket linkage
    Type (4) Grease refill service point accessible from ground
    Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
    Type (1) Boom and stick torsion-resistant with welded box design
    Type (2) High-tensile steel with solid steel castings at pivot areas
    Type (3) Boom and stick stress-relieved after welding
    Type (4) Float valve for boom down function
    Maximum Digging Depth 26.3ft
    Maximum Digging Height 41.9ft
    Maximum Digging Reach 45.6ft
    Maximum Dump Height 27.9ft
    Bucket Digging Force - ISO 120947lbf
    Bucket Digging Force - SAE 112600lbf
    Stick Digging Force - ISO 104761lbf
    Stick Digging Force - SAE 98800lbf
    Capacity 1:1 10.6yd³
    Maximum Material Density - Loose 3030lb/yd³
    Number of Teeth 5
    Tooth System Cat C70 or M75
    Total Width 8.8ft
    Weight - Including Standard Wear Package 18521lb

    Standard Equipment:

    • 2 x Cat 3512E engines
    • Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution
    • Air-to-Air After Cooling (ATAAC)
    • Turbocharger
    • Hydraulically driven radiator fan
    • Electronically controlled fan speed
    • Micro processed engine management
    • Heavy-duty air filters
    • Two-stage fuel filter with series filtration
    • High-capacity water seperator
    • Starting aid -- automatic ether
    • Exhaust manifold and turbo heat shields
    • Dual 24 V electric starters per engine
    • Automatic engine idle shut down
    • Automatic fuel priming
    • Hydraulic Optimization
    • Operator Assist: Enhanced Motion Control
    • Cat Hydraulic Hose assemblies
    • Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature
    • Pressure cut-off for main pumps
    • Cooling of pump transmission gear oil
    • Closed loop swing circuit
    • Pressure testing points
    • Full-flow high-pressure filters (100 μm), main pumps
    • High pressure filters (100 μm), closed swing circuit
    • Full-flow filters (10 μm), return circuit
    • Pressure filters swing charge circuit (40 μm)
    • Pressure filters pilot circuit (6 μm)
    • Transmission oil filters (40 μm)
    • Boom float valve (FS and BH)
    • Stick float valve (FS)
    • 6 Maintenance-free batteries
    • Lockable battery isolator switch
    • Lockable starter isolator switch
    • 13 LED high-brightness working flood lights
    • 17 LED service lights
    • 2 acoustic travel alarms – forward and reverse (power module, oil cooler module)
    • 2 electric horns (1 cab module, 1 oil cooler module)
    • HD tracks with cast double-grouser track pads
    • 1400 mm (4'7") wide track pads
    • HD fixed axle carrier and load rollers
    • HD fixed axle idlers
    • Automatic hydraulic retarder valve
    • Hinged travel motor covers
    • Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
    • Fully hydraulic self-adjusting track tensioning system with piston accumulators
    • Rectangular grease container (fill via service station)
    • Lubricated pinion in swing ring
    • Grease filters (200 μm)
    • Single hydraulically driven HVAC system
    • In-floor window with removable grate
    • Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown
    • Independently adjustable seat consoles with integrated joysticks
    • Electronic-Hydraulic Servo Control
    • Elevated full-size trainer seat with 2-point safety belt and laptop desk
    • Additional fold-away auxiliary seat with 2-point safety belt
    • Three cup holders
    • FM/AM radio with USB and AUX input
    • Parallel intermittent wiper/washer
    • Roller blinds
    • Monitoring system with 254 mm (10 in) color touchscreen
    • 45° stairway from engine bay to operator cab
    • Powered 45° access stairway
    • Heated mirror on LH side
    • Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
    • Level indicators for length and crosswise inclination
    • Document Storage
    • Service access holes from both sides in boom and stick (FS and BH)
    • Boom and stick thermally stress relieved after welding
    • Catwalks with rails at boom (FS and BH)
    • Wear Package (as per bucket selection)
    • Cat Product Link Elite (Cellular)
    • Cat MineStar Solutions Ready
    • Engine oil exchange interval -- 500 hours
    • Hydraulic oil change interval – 10,000 hours
    • Scheduled Oil Sampling (S·O·SSM) ports
    • Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil
    • Cat battery charging connector
    • Indicator lights
    • Cat Electronic Technician service port
    • Dirt wiper at swivel
    • Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
    • Operator Protective Guard (Top Guard)
    • All-round safety glass
    • Emergency egress ladder
    • ISO or ANSI decals

    Optional Equipment:

    • Track guards – full length
    • Track guards – center
    • Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)
    • Starting aid – cold weather
    • 120 V or 240 V cold weather package
    • Fuel heater
    • Heated cab mirror
    • Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced
    • Copper Mesabi or aluminum bar plate engine cooling packages
    • LED working lights
    • Powered 45° access stairway
    • Camera Monitoring System (2 cameras and additional color display)
    • Operator Protective Guard (Front Guard)
    • Product Link Elite radio options (Cellular, Satellite, No Radio)
    • 3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick
    • Additional buckets available, based on application, through your local Cat dealer

    Coming Soon

    What Our Customers Are Saying About Us

    3.9
    Based on 46 reviews
    powered by Google
    Renee Herndon
    21:55 29 Feb 24
    Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.
    David Lawrence
    13:04 22 Feb 24
    Brandon Pierce
    22:00 18 Feb 24
    Darin Noe
    01:17 16 Feb 24
    Jose Soto
    15:26 23 Sep 23
    Hunter Elliott
    16:17 07 Sep 23
    Rick Kelly-Crapse
    21:06 25 Aug 23
    They had all my parts for my 3208 Cat.Friendly folks at parts counter.
    js_loader