| Bore | 5.4in |
|---|---|
| Displacement | 927.6in³ |
| Emissions | U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA |
| Engine Model | C15 Cat® |
| Engine Power - ISO 14396:2002 | 426hp |
| Gross Power - SAE J1995:2014 | 435hp |
| High Idle Speed | 2300r/min |
| Low Idle Speed | 800r/min |
| Maximum Altitude - Without Derating (Tier 3/Stage IIIA) | 9098ft |
| Maximum Altitude – Without Derating (Tier 4 Final/Stage V) | 9298ft |
| Net Power - ISO 9249:2007 | 405hp |
| Net Power - SAE J1349:2011 | 405hp |
| Note | Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
| Rated Speed | 1800 |
| Stroke | 6.7in |
| Torque Rise | 33% |
| Maximum Operating Weight (Tier 3/Stage IIIA equivalent) | 91549lb |
|---|---|
| Maximum Operating Weight (Tier 4 Final/Stage V) | 92568lb |
| Operating Weight (Tier 3/Stage IIIA equivalent) | 89186lb |
| Operating Weight (Tier 4 Final/Stage V) | 90207lb |
| Direct Drive - Forward 1 | 4.2mile/h |
|---|---|
| Direct Drive - Forward 2 | 7.5mile/h |
| Direct Drive - Reverse 1 | 4.3mile/h |
| Direct Drive - Reverse 2 | 8.6mile/h |
| Transmission Type | Planetary - Powershift - ECPC |
| Bore | 4.7in |
|---|---|
| Lift System | Double Acting Cylinder |
| Main Relief Pressure | 3771psi |
| Maximum Supply Pressure | 3495psi |
| Pump Flow at 1800 rpm | 30.9gal/min |
| Stroke | 42.1in |
| Cooling System | 30.6gal (US) |
|---|---|
| Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) | 8.5gal (US) |
| Differential - Final Drives - Front | 26.4gal (US) |
| Differential - Final Drives - Rear | 29.1gal (US) |
| Engine Crankcase | 9gal (US) |
| Fuel Tank | 206.6gal (US) |
| Hydraulic Tank Only | 35.4gal (US) |
| Note | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H |
| Transmission | 17.4gal (US) |
| Front | Planetary - Fixed |
|---|---|
| Oscillation Angle | ±5° |
| Rear | Planetary - Oscillating |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released |
|---|---|
| Service Brakes | Multi Disc Wet (Enclosed) 2 WHL |
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)* | 110dB(A) |
| Note (1) | * Sound suppression equipped |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Machine Sound Power Level (ISO 6395:2008) | 113dB(A) |
|---|---|
| Machine Sound Power Level (ISO 6395:2008)* | 110dB(A) |
| Note (1) | * Sound suppression equipped |
| Note (2) | The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (4) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Pressure Level (ISO 6396:2008) | 73dB(A) |
| Operator Sound Pressure Level (ISO 6396:2008)* | 72dB(A) |
| Bore | 4.5in |
|---|---|
| Maximum System Flow | 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) |
| Steering Pressure Limited | 3481psi |
| Steering System - Circuit | Pilot operated, load sensing |
| Steering System - Pump | Piston - Variable Displacement |
| Stroke | 22.7in |
| Vehicle Articulation Angle | 86° |
| Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard | 10.16ft |
|---|---|
| Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard | 9.38ft |
| Ground Clearance | 2.11ft |
| Ground Clearance - Bumper | 3.15ft |
| Height - Cab Roof | 13.75ft |
| Height - Top of Beacon | 15.63ft |
| Height - Top of Exhaust Pipe | 14.56ft |
| Height - Top of Hood | 10.87ft |
| Height to Top of Air Conditioning Condenser | 14.99ft |
| Hitch to Centerline of Front Axle | 6.07ft |
| Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard | 28.59ft |
| Turning Radius - Inside of Wheels | 9.18ft |
| Wheel Base | 12.14ft |
| Width - Over Wheels | 12.47ft |
| Capacity, Rated | 16.1yd³ |
|---|---|
| Height with Cutting Edge and Screen | 6.23ft |
| Maximum Depth of Cut | 1.5ft |
| Maximum Lift above Ground | 4.19ft |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 28.59ft |
| Width - Over End Bits | 14.75ft |
| Width – Moldboard Length | 14.16ft |
| Capacity, Rated | 20.9yd³ |
|---|---|
| Height with Cutting Edge and Screen | 6.63ft |
| Maximum Depth of Cut | 2.03ft |
| Maximum Lift above Ground | 3.825ft |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 29.54ft |
| Width - Over End Bits | 14.83ft |
| Width – Moldboard Length | 14.66ft |
| Capacity, Rated | 22.9yd³ |
|---|---|
| Height with Cutting Edge and Screen | 6.62ft |
| Maximum Depth of Cut | 2.03mm |
| Maximum Lift above Ground | 3.79ft |
| Overall Machine Length (includes rear radiator guard, measured to cutting edge) | 30.7ft |
| Width - Over End Bits | 14.41ft |
| Width – Moldboard Length | 14.25ft |
| Combination Tips (Weight Group) | 21125lb |
|---|---|
| Diamond Tips Weight (Group) | 23997lb |
| Drum Diameter | 63.4in |
| Drum Width | 47.2in |
| Feet Per Row | 6 |
| Feet Per Wheel | 30 |
| Outside Diameter | 77.6in |
| Outside Diameter - Diamond | 78.1in |
| Paddle Tips - Weight (Group) | 20540lb |
| Plus Tips - Weight (Group) | 22002lb |
| Replaceable | Weld On |
| Tip Height | 179mm |
| Tip Height - Diamond | 7.25in |
| Width Over Drums | 3800mm |
