| Maximum Milling Depth | 13in |
|---|---|
| Milling Width | 88in |
| Minimum Left Cutting Radius | 6.56ft |
| Minimum Right Cutting Radius | 5.91ft |
| Note (1) | Number of bits with 15 mm spacing |
| Number of Bits | 185 |
| Rotor Speeds | 100 / 109 / 118 rpm |
| Build Number | 02C |
|---|---|
| Emissions | U.S. EPA Tier 4 Final, EU Stage V |
| Engine | Cat C18 twin-turbo |
| Engine Power | 798hp |
| Gross Power | 806hp |
| Maximum Milling Speed | 328ft/min |
| Maximum Travel Speed | 3.7mile/h |
| Note (1) | Operating weight includes base machine with 75 kg (165 lb) operator, all standard equipment, power canopy, inboard ski, dust abatement system, high pressure wash system, 15 mm rotor, pedestal seats, floor mats, two ground displays, 50% water, 50% fuel and |
|---|---|
| Note (2) | Transport weight includes base machine, all standard equipment, power canopy, inboard ski, dust abatement system, high pressure wash system, 15 mm rotor, pedestal seats, floor mats, two ground displays, empty water, full fuel and other operating fluids. |
| Operating Weight | 76202lb |
| Transport Weight | 73493lb |
| Conveyor Swing | ±60 degrees from center |
|---|---|
| Height - Canopy | 13.29ft |
| Maximum Truck Clearance | 15.94ft |
| Operating Length - Conveyor Up | 47.64ft |
| Operating Width | 10.2ft |
| Transport Height | 9.84ft |
| Transport Length | 40.78ft |
| Transport Width | 8.99ft |
| Cooling System | 27.5gal (US) |
|---|---|
| Engine Oil | 17.2gal (US) |
| Fuel Tank | 292.7gal (US) |
| Hydraulic Tank | 29.9gal (US) |
| Water Spray System Tank | 898.2gal (US) |
| Recyclability | 96% |
|---|
